[3anabi]

Hello
Here, I want to downgrade my ps3, I followed the tutorial
when I patch the dump, I put in SD and I passed through eflasher with configuration switches as the one above, and any other up.
Arrived at the stage of the dongle, I'm stuck:
I put the dongle firmware with it, I turn, I made ​​on / off eject, I have 3bips, dongle (PS3Key) is red, then blue, and then off, ps3 only it does not go off. ...
On the screen "plug controller with usb cable"
I buy another dongle, same pb, and I put the correct firmware fix e3downgrader BD beta (e3card reader) it's 4 days I am blocked and I run tt forums without finding no solutions ...
Please help me!

[3absiso]

Originally Posted by 3anabi Hello Here, I want to downgrade my ps3, I followed the tutorial in which you request the flash dump avc software called NOR PATCH V1, qaund I patch the dump, I put ds SD and I passed through eflasher avc configuration switches as the one above, and tt other top. Arrived at the stage of the dongle, I'm stuck: I put the dongle firmware with it, I turn, I made ​​on / off eject, I have 3bips, dongle (PS3Key) is red, then blue, and then off, ps3 only it does not go off. ... On the screen "plug controller with usb cable" I buy another dongle, same pb, and I put the correct firmware fix e3downgrader BD beta (e3card reader) it's 4 days I am blocked and I run tt forums without finding no solutions ... Please help me!

You have to update the Dongle for FSM Jigs, search for the Downgrade jigs of your Dongle

[baileyscream]

Originally Posted by TDCroPower2 Click here to see full text so i have manage to downgrade different PS3 with one E3 Flasher, a simple method but no one have see this way... so here my tutorial! sorry for my bad english i'm from croatia! The user tennesse2 and i make a independent tutorial for all steps with the e3 flasher and all works! ... also the backup function but not perfect *** Update 17.03.2012 *** This way to downgrade is actually solderless !!! here we go ... 1.0. Playstation 3 NOR-Flash Backup Click here to see full text official Playstation 3 Firmware 4.11(28.02.2012) *** Info: the microSD must format in FAT32 *** 1.0. update your Playstation 3 to the original Firmware 4.0 1.1. shut off the Playstation 3 1.2. set the 6 switch of the E3 Flasher: 1.3. put the MicroSD-Card into the E3-Flasher 1.4. starts the Playstation 3 and let it boots to the XMB 1.5. push the "Start"-Button on the E3-Flasher the flash process begins and the 8 LEDs will one by one lights on the flash success, when all 8 LEDs blinks. 1.6. shut down the Playstation 3 1.7. put the MicroSD-Card out of the E3-Flasher 1.8. save the backup from your MicroSD-Card to your PC in a folder like this: BackupPS3FlashFWXYZ (XYZ=FW-Version here 400) WARNING: the backup must fit exactly the filesize of 16,777,216 Bytes **see here** and check it with the FlowRebuilder. If the backup don't fit the filesize or it's corrupt. Repeat the Steps complete from part 1.1. 2.0. Requirements a valid backup of your OFW 3.7x or OFW 4.x a USB Mass Storage Device format in FAT32, min. capacity 256MB a Playstation 3 working Jailbreak-Dongle with the Downgrade hex 2.1. Preparation PS3 NOR Patcher v1 include downgrade v2 patch (thx @ten nesse2) (08.05.2012) Downgrade files (08.05.2012) 2.2. Flash Backup patch with the PS3 NOR Patcher Click here to see full text 2.2.1. copy your NOR Flash Backup-File of the OFW 3.7x or OFW 4.x to the folder of the PS3 NOR Patcher v1 2.2.2. starts PS3 NOR Patcher.exe: 2.2.3. klick in the menu on „Load Patch Files“ and select the "config.ini" from the PS3 NOR Patcher folder. 2.2.4. you will see the patches that have readed in the message box. 2.2.5. klick in the menu on „Open NOR Dump File“ and select the "bkpps3.bin" from the PS3 NOR Patcher folder. 2.2.6. klick in the menu on „Patch NOR Dump File“ and your message box will look like this. 2.2.7. klick in the menu on „Save Patch NOR Dump File“ and save the finished „bkpps3.bin.patched“ to your PS3 NOR Patcher folder. 2.3. Downgrade with the E3 "FLASH FUN" mode Click here to see full text 2.3.1. copy the "bkpps3.bin.patched" file to your MicroSD-Card and rename it to "bkpps3.bin". 2.3.2. unplug the power cable from the Playstation 3 2.3.3. put the MicroSD-Card into the E3-Flasher 2.3.4. set the 6 switch of the E3 Flasher: 2.3.5. shut off the eSATA station or disconnect the eSATA cable 2.3.6. plug in the power cable of the Playstation 3. 2.3.7. start the Playstation 3 and push the "START"-Button on the E3-Flasher when the lights of the E3 Flasher are on. the flash process begins and the 8 LEDs will one by one lights on the flash success, when all 8 LEDs blink. 2.3.8. unplug the power cable from the Playstation 3 2.3.9. switch the first switch of the E3 Flasher from "FLASH FUN" to "PS3 MODE" 2.3.10. shut on the eSATA station or connect the eSATA Kabel 2.3.11. plug in the power cable from the Playstation 3 and turn on the Playstation 3 2.3.12. If you flashed your PS3 correctly, your PS3 will start and show this message: “Push PS button”. DO NOT PRESS THE PS BUTTON! 2.3.13. unplug the power cable of the Playstation 3. 2.3.14. Insert the Jailbreak/Downgrade Dongle to the right most USB port on PS3 2.3.15. plug in the power cable of the Playstation 3. 2.3.16. starts the Playstation 3 in factory mode: push the "POWER" Button and directly the "EJECT"-Button on the Playstation 3. the Playstation 3 check this with 3 times beep 2.3.17. wait until the Playstation 3 shut automatic off 2.3.18. unplug the Jailbreak/Downgrade Dongle. 2.3.19. Copy the files Lv2diag.self and PS3UPDAT.PUP from the Downgrade_Files.rar package of the folder enter to the ROOT (not subfolder!) of your USB Mass Storage Device 2.3.20. Insert the USB Mass Storage Device to the right most USB port on PS3. 2.3.21. Now turn on your PS3 and leave it alone, the PS3 should turn off by itself in 10-15mins. 2.3.22. Unplug your USB Mass Storage Device from the PS3, and turn the console back on. It should boot to the XMB menu, once it does this turn your PS3 off again. 2.3.23. Now copy and replace the files on your USB Mass Storage Device with the Lv2diag.self from the exit folder 2.3.24. Insert once again to the right most USB port on your PS3 2.3.25. Turn on your PS3, it should turn off by itself in about ~20 seconds. 2.3.26. Welcome to the Rogero V3.1 CFW 3.55 include 4.11 Spoofer @admi n ... is this a front page TUT , i have more of this for the e3 flasher but in german

no verification of dump other than file size and relying on flowrebuilder to give an error.

file size will show as correct size even if its a bad dump.
flowrebuilder will not give errors if any part of the file system is missing. and thats just for a start.

it needs a link to the wiki verify page at the least if he isnt going to post how to verify it.

no mention of de-hashing to prevent soft bricking if a no check / accidental update is done.

and did the o/p not see @playerkp420 's or my own guides?
we both do a downgrade tut / guide that uses the multi console update (more than 1 console can be downgraded)

woops
never mind this is an old thread.
i missed the date on the o/p

who woke this up?

[3anabi]

Originally Posted by 3absiso You have to update the Dongle for FSM Jigs, search for the Downgrade jigs of your Dongle

My dongle is a day Downgrade My problem is not in dongole

[3absiso]

Originally Posted by 3anabi My dongle is a day Downgrade My problem is not in dongole

Please send your dump for verification.
it looks you use google translate ya Sa7bi
Mesh moshkeleh
Here is your updated Jigs

[haz367]

Originally Posted by 3anabi I'm stuck: I put the dongle firmware with it, I turn, I made ​​on / off eject, I have 3bips, dongle (PS3Key) is red, then blue, and then off, ps3 only it does not go off. ... On the screen "plug controller with usb cable"

i know this answer may be useless but did u try before inserting the FSM dongle(assuming u have it correclty loaded with a FSM payload!) after u pull the power cord when it shows on screen "plug controler ......" before putting back the power cord, first insert the dongle in right port, then put back the power cord and trigger FSM, also try a couple times if it fails it might need a real quik power+eject push

[3anabi]

Tried all updates without any benefit

[3absiso]

Originally Posted by 3anabi Tried all updates without any benefit

Did you try what @haz367 suggested

[3anabi]

Originally Posted by 3absiso Did you try what @haz367 suggested

Do not understand

[3absiso]

Originally Posted by 3anabi Do not understand

I sent you what he means in Arabic to Your PM