[haz367]

@Kammmmi

the little sh*t..right...u can't trust nothing these days..and f*cking up that underneath bd drive ribbon on a slim jsd-000...i have to agree the first one is a pain reconnecting it...then again it's pretty easy...anyway that is ur problem why it keeps checking via the recovery, u have to fix that ribbon..can't u put back a new piece of cartboard between it..just take ur time...not saying its easy but its the only way...goodluck

[wiammaren]

it might take it and install via recovery, else i have no cue

[Kammmmi]

Originally Posted by haz367 @Kammmmi the little sh*t..right...u can't trust nothing these days..and f*cking up that underneath bd drive ribbon on a slim jsd-000...i have to agree the first one is a pain reconnecting it...then again it's pretty easy...anyway that is ur problem why it keeps checking via the recovery, u have to fix that ribbon..can't u put back a new piece of cartboard between it..just take ur time...not saying its easy but its the only way...goodluck

I have tried with the BD it came with no luck, and another CECHG01 BD drive, no luck. Not sure what I am going to do. Just gonna have to keep on trying. . .

[haz367]

is is the newer SLIM 25xxx with that ribbon underneath the BD drive?
never had to fix this but why not try this, take something that is the thicknes of that brown clip wich u put down to hold the ribbon in place, then doubleside tape a stroke of something...be creative so that its just above the "copper strip" then u have to use some finger magic or ask a chinese girl they tend to have small fingers j/k then put that ribbon back in place, when u put it back before pull the ribbon carefully as far as u can whit ur finger and keep it there then slide it in and with a bit of luck it stays there because of that strip cartboard or something..whop place it down..screw everything together and give it a shot....or hotglue/tape or something....something should work..it even work when u still can see a bit of the copper strip..meaning it doesnt need to be fully inthere..although thats the correct way....even when it sits a little scheef it works

hey goodluck man...buying a PS3 like this and then discovering this crap, that's the downside of buying online stuff like this else a trip to the house would be easier...

[Kammmmi]

Originally Posted by haz367 is is the newer SLIM 25xxx with that ribbon underneath the BD drive? never had to fix this but why not try this, take something that is the thicknes of that brown clip wich u put down to hold the ribbon in place, then doubleside tape a stroke of something...be creative so that its just above the "copper strip" then u have to use some finger magic or ask a chinese girl they tend to have small fingers j/k then put that ribbon back in place, when u put it back before pull the ribbon carefully as far as u can whit ur finger and keep it there then slide it in and with a bit of luck it stays there because of that strip cartboard or something..whop place it down..screw everything together and give it a shot....or hotglue/tape or something....something should work..it even work when u still can see a bit of the copper strip..meaning it doesnt need to be fully inthere..although thats the correct way....even when it sits a little scheef it works hey goodluck man...buying a PS3 like this and then discovering this crap, that's the downside of buying online stuff like this else a trip to the house would be easier...

It is a CECHG01, so one of the fats. And I tried holding it with my finger just to see if it'd let me run QA and still no luck?

I think I have finally got it guys! The thing is, I need the Rebug CFW 3.55.3 download and I can't find it. The reason I need this is because I have another working blueray drive compatible with my PS3 that is on Rebug 3.55.3.

[concretecork]

Originally Posted by Kammmmi So I've been following a tutorial on how to downgrade from Rogero 4.30 back to any CFW, my choice being Rebug 3.55.4. But at this time I am now stuck on this hybrid and cannot load on the Rogero 3.7. When I try to load it from the XMB I get data corrupted and from recovery it just says it's still checking. I also ran QA Flag once, and now it will no longer work. Any help guys?

I had the almost exact same thing happen to me. How I got stuck on hybrid was I qa flagged my ps3 and then used the 999 downgraded that was a big no no. Did you use 999 downgrader? I did manage to get my ps3 back to other firmware with allot of help. I think there is a tutorial for this issue. I found it with Google. And it also didn't work the first couple times. It was allot of flashing and very stressful. Difference for me is I was stuck on Rebug hybrid and i think your on rogero hybrid correct? I had to play around with debug setting I remember.

[haz367]

i think it's all coming from Rogero's and qa stuff? u can trow the 3.55.4 999 downgrader at anything..it always works (9.90?) always higher, also before messing arround..disable any spoof?!..for rebug 4.21.2(spoof on) it doesn't matter..i'm positive it isn't the 999 downgrader..

[Kammmmi]

I'm getting this error code when going to Rebug 3.55.3: 8002F14E

Something to do with the BD drive?

[haz367]

https://www.google.nl/search?q=8002F...ient=firefox-a

[Kammmmi]

Originally Posted by haz367 https://www.google.nl/search?q=8002F...ient=firefox-a

Could I use this other BD drive that I have that is already on Rebug 3.55.3 and use to when going to Rebug?
************* [ - Post Merged - ] *************
Alright guys, I am now back on Rebug 3.55.3! Thanks for all the help!