[haz367]

oh the elite..he knows alot...maybe come onboard and discuss it here for all to read...now go back to ur irc..i don't need it....to many egos

and pls stop quoting it..waste of time man

[OGzxFTW]

Originally Posted by haz367 oh the elite..he knows alot...maybe come onboard and discuss it here for all to read...now go back to ur irc..i don't need it....to many egos and pls stop quoting it..waste of time man

Your the one who started this so how about you leave and don't quote me...

[haz367]

yup....cuse i hate folks like u guys....coming here...blaming a perfect working guide for a brick...go back one page and re-read my first post and perhaps also the first post...who's the cause of the bricker??? pls tell me i'm gonna repeat it again something with e3downgrade+patchfile and maybe corrupt backup...i'm stopping now as its a waste of time

this could al be so simple....helping eachother..there's a forum for that...no half ass accusations and then tlling us to come on the irc for a l33t short 1 liner reply....just post it here for all to read so all people can learn from it.. [/quits]

[OGzxFTW]

Originally Posted by haz367 yup....cuse i hate folks like u guys....coming here...blaming a perfect working guide for a brick...go back one page and re-read my first post and perhaps also the first post...who's the cause of the bricker??? pls tell me i'm gonna repeat it again something with e3downgrade+patchfile and maybe corrupt backup...i'm stopping now as its a waste of time this could al be so simple....helping eachother..there's a forum for that...no half ass accusations and then tlling us to come on the irc for a l33t short 1 liner reply....just post it here for all to read so all people can learn from it.. [/quits]

Idc, I will always **** on that guide, why? Because when he made it, it was really bad even though the info was on the wiki to copy and his mistakes lead people to brick, If the guide is 'good' now then its because euss told him of all the mistakes.
If people would just follow the wiki instead of crap guides that are based on the info on devwiki but don't have every last detail then they wouldn't brick.

[3absiso]

Originally Posted by OGzxFTW Your the one who started this so how about you leave and don't quote me...

He wont leave and i will jump in.
you and your friend are full of ****. Bailys is trying his best.
why blaming him knowing that there are a lot off peoples here who do not have the skill to do the downgrade but insist on doing it. it is their mistake not his.

also you are more than welcome to show us some off shortages in bailys guide. it will help a lot.
but keep bragging you and your friend

[haz367]

Originally Posted by OGzxFTW Your the one who started this so how about you leave and don't quote me...

pls stfu now..u are making a fool of urself..again re-read the main post
but i guess whatever u wont like to read u wont read scrape the sh*t out of ur eyes.. [/quits again]

[OGzxFTW]

Originally Posted by 3absiso He wont leave and i will jump in. you and your friend are full of ****. Bailys is trying his best. why blaming him knowing that there are a lot off peoples here who do not have the skill to do the downgrade but insist on doing it. it is their mistake not his. also you are more than welcome to show us some off shortages in bailys guide. it will help a lot. but keep bragging you and your friend

In his e3 part go to flowrebuilder patching and flashing
Remember its the e3 section
He says to patch a BYTE REVERSED NOR dump or interleaved nand dump..
He is tellin people to patch the byte reversed dump, not the original bkpps3 that comes straight off the sd card which results in a brick.
E3 dumps must be flashed back the same way it was read (Not bytereversed)
He also says to use e3downgrade.bin which has known problems, Flash fun should be the only method you should use to flash with e3.

Im not going to look at his guide any further because i dont have time.

[3absiso]

Originally Posted by OGzxFTW In his e3 part go to flowrebuilder patching and flashing Remember its the e3 section He says to patch a BYTE REVERSED NOR dump or interleaved nand dump.. He is tellin people to patch the byte reversed dump, not the original bkpps3 that comes straight off the sd card which results in a brick. E3 dumps must be flashed back the same way it was read (Not bytereversed) He also says to use e3downgrade.bin which has known problems, Flash fun should be the only method you should use to flash with e3. Im not going to look at his guide any further because i dont have time.

Will, i checked his guide now and he says clearly patch the original Dump.
the Byte reversed is used for verification purposes.
if you are not smart enough to understand that it is your problem.
from where did you get patching the byte Reverse Dump. or you have been told that.
See what is written before accusing peoples.

regarding the E3-Downgrade Method as in the Wikidev guide they are mentioning the two way as he did in his.

and Baily always say, that a lot of the info are from the Wikidev but made it easier to understand and we all know that

[haz367]

Originally Posted by OGzxFTW In his e3 part go to flowrebuilder patching and flashing Remember its the e3 section He says to patch a BYTEREVSERD NOR dump or interleaved nans dump.. He is tellin people to patch the byte reversed dump, not the original bkpps3 that comes straight off the sd card which results in a brick. E3 dumps must be flashed back the same way it was read (Not bytereversed) He also says to used e3downgrade.bin which has known problems, Flash fun should be the only method you should use to flash with e3.

LOL....this is explained many times....there are 2 sets of patches:
but people aint reading.....

original Progskeet patches(human readable = unscrambled = IFI)

then they made for easy patching..skipping some bytereverse confusion....
E3 manual patches( bytereversed PS3 readable patches = FII like E3 flasher dumps) that all...both patches work ofcourse and is explained in that specific guide/topic, if baileyscream did not update..shame on him but the fact is that this guy..the topic starter ****ed up all by using e3_downgrade+patched dump????? can u show us where the guide is writing that part..please link it

once again to make it clear once and for all
============================

use default progskeet patches? >>>> open original bkpps3.bin-bytereverse it-change option to patch a bytereversed NOR dump or(so it reads IFI = human readable).... > load the "original" progskeet patch.txt>anf finally>> bytereverse it again(so it reads FII again = e3 style)(the last flowrebuilder option)

using the E3 manual patches previous mentioned? they make it for us to not waste more time then required:
open original bkpps3.bin(FII) with flowrebuilder>patch a bytereversed NOR dump or... > load the E3 manual Progskeet patch.txt>done

and finally to make it even more simple
rogero made an AUTOPATCHER, it detects the dump(FII or IFI) and patch it on the fly...the easiest method so to speak


now don't forget to re-read it a couple times to sink in...ok....thx!

[redtree]

Yeah, the guide is correct on these points

if it comes back ok then delete ( bkpps3.swap.bin & the folder with the same name) all you want is the origional bkpps3.bin (don’t forget to thank the person or persons who checked it for you)

and in the next FlowRebuilder patching & flashing step

Open flow rebuilder and select “PATCH a Byte reversed NOR dump or an interleaved and unscrambled NAND dump”.

This is correct because we are patching the original dump made with the E3 Flasher. Again, previous step said you can delete the bkpps3.swap.bin and unpacked folder once you have confirmed your dump is valid, so of course we are not patching the wrong .bin

So all good! Other than that, the part about flashing back with switch 6 up I don't do myself as it gives me an error code. It might be as I use the E3 Linker (I also get an error code if the flasher isn't seated in the hard drive slot).