[arloubas]

Originally Posted by arloubas Can my problem be due to the fact that when I dumped my bricked console (Rogero CFW 4.21), FlowRebuilder reported that one of my NANDs has one bad block?

The problem I refer to is that my PS3 is RLODed after flashing my patched dump back. Any suggestions? @baileyscream , can you help?

[Sarah1331]

Originally Posted by sREa Ty, so know some place that can help me? The "best" shop here denies everything. EDIT Forgot to mention it's a CECHC

Check the service in my sig



Sent from my iPhone 5 using Tapatalk

[Sarah1331]

Originally Posted by jensen76 tryed that and everything is the same.dumps are all the same... only thing i can try is new usb stiks.. there is 1 bad block on cpu side so im giving op now.dont know how to fix it.the consol works fine when i flash stock nands back.only thing i cant get i to do is read the pup fil in service mode.tryed 5 usb stiks,3 harddrives.nothing is working. here are the nands on CECHG04 sem-001

Sorry I haven't followed you
What names are the files on the USB stick you use???
What fsm dongle do you use???
When you interleaved and extracted how many files did you get in the folder???

You can always send it to me if in uk



Sent from my iPhone 5 using Tapatalk

[Sarah1331]

Originally Posted by arloubas The problem I refer to is that my PS3 is RLODed after flashing my patched dump back. Any suggestions? @baileyscream , can you help?

What flasher are you using ??
What model ??
Are you getting any errors during writing the dump


Sent from my iPhone 5 using Tapatalk

[arloubas]

Originally Posted by Sarah1331 What flasher are you using ?? What model ?? Are you getting any errors during writing the dump Sent from my iPhone 5 using Tapatalk

Console: CECHG04
Board: SEM-001
Flash chips: ECF1009540

I use Progskeet 1.2 with different bitstreams for dumping and flashing (I cannot get it to dump and flash with the same bitstream, I even use different bitstreams for each of the two flash chips). I get no errors writing the dump. For verification, after I flashed the patched dump back, I dumped it and the two dumps are identical (this was done for both of the flash chips).

I have also tried this: I injected into the 3.55 Kmeaw dump taken with Multiman (before flashing the Rogero 4.21 CFW) the bootloader from the Rogero 4.21 CFW (backups of the flash taken with Multiman lack the bootloader) and dumped with this. The result is the same: RLOD.

[jensen76]

Originally Posted by Sarah1331 Sorry I haven't followed you What names are the files on the USB stick you use??? What fsm dongle do you use??? When you interleaved and extracted how many files did you get in the folder??? You can always send it to me if in uk Sent from my iPhone 5 using Tapatalk

i can get in service mode no problem.just cant get it to read the damm pup file.
Lv2diag.self from the guide
PS3UPDAT.PUP rogeros 3.7A and also tryed 4.30 v2.05

my service dongel isent the problem as i know it works.tryed to put it in service mode then flash back original nands and the consol was still in service mode.then i flashed back the modified nands and tok ik out of service mode and flashed back original nands and service mode was gone.

i get 9 files and 2 folders asecure loader whit metldr and ros whit ros0 4.31 and ros1 4.31 whit 25 files in them.

i think there is somthing rong whit my cpu nand dump as it has a bad block and maby it dosent get patched properly becourse offset 01B12020 dosent seems right to me.

i can sent you all the files if you have time to take a look at them.i have them all on my server.

i live in denmark so sending it to you is not posible

[Sarah1331]

Originally Posted by arloubas Console: CECHG04 Board: SEM-001 Flash chips: ECF1009540 I use Progskeet 1.2 with different bitstreams for dumping and flashing (I cannot get it to dump and flash with the same bitstream, I even use different bitstreams for each of the two flash chips). I get no errors writing the dump. For verification, after I flashed the patched dump back, I dumped it and the two dumps are identical (this was done for both of the flash chips). I have also tried this: I injected into the 3.55 Kmeaw dump taken with Multiman (before flashing the Rogero 4.21 CFW) the bootloader from the Rogero 4.21 CFW (backups of the flash taken with Multiman lack the bootloader) and dumped with this. The result is the same: RLOD.

Does it beep when it RLOD


Sent from my iPhone 5 using Tapatalk

[Sarah1331]

Originally Posted by jensen76 i can get in service mode no problem.just cant get it to read the damm pup file. Lv2diag.self from the guide PS3UPDAT.PUP rogeros 3.7A and also tryed 4.30 v2.05 my service dongel isent the problem as i know it works.tryed to put it in service mode then flash back original nands and the consol was still in service mode.then i flashed back the modified nands and tok ik out of service mode and flashed back original nands and service mode was gone. i get 9 files and 2 folders asecure loader whit metldr and ros whit ros0 4.31 and ros1 4.31 whit 25 files in them. i think there is somthing rong whit my cpu nand dump as it has a bad block and maby it dosent get patched properly becourse offset 01B12020 dosent seems right to me. i can sent you all the files if you have time to take a look at them.i have them all on my server. i live in denmark so sending it to you is not posible

Yes please post them to the dumpcheck email ill take a look


Sent from my iPhone 5 using Tapatalk

[arloubas]

Originally Posted by Sarah1331 Does it beep when it RLOD Sent from my iPhone 5 using Tapatalk

Yes, it beeps three times.

My dump is not byte-reversed, contrary to @jensen76 's one and the string "asecure_loader" is at offset 0x00040220, not at offset 0x01B12020.

Edit: Wrong, @jensen76 was reffering to the CPU NAND flash dump, not the unified dump. Anyway, in my CPU NAND flash dump, the string "saceru_eoldare" is at offset 0x00AF5020, not at offset 0x01B12020.

[Sarah1331]

When you flash orig dump to console what happens??


Sent from my iPhone 5 using Tapatalk