[haz367]

nice..2 ways to know its refurbished, at the time there wasn't the "new 430 coreos" way so never checked the inside...good info....the downside is the +3.56 they put on it...the positive for us the new patches..screw um

[zeruel85]

Originally Posted by haz367 yup, there must a be a refurbished white sticker on the bottom of the PS3

Originally Posted by 3absiso I also saw small yellow Circle sticker on the Mobo for one of the refurbished PS3 i worked on

Thank you mates! When I have time, I will check this two things on the console.

P.S.: now I'm trying to flash the two nands with ProgSkeet 1.2 and zif socket tsop48 (desoldered nands), but always find differences after flashing and redumping...

[aragorn]

Sent 2 of my good dumps (i think), there is only some difference here with baileyscreams guide: http://i.imgur.com/Br6PF.png
Is this possible? The length of the asecure loader looks fine according to the wiki..

[daveyaz]

Originally Posted by daveyaz Sorry for asking help.... I just couldn't know what to do .... Thanks for your help..... So iwill connect a wire as shown and then continue with regular downgrade ...

So Sorry for asking again...but im in real problem...

is this wire soldering method will rescue my ps3 and power on normally and then i continue one key downgrade OR flash fun method ???

Sorry again

[3absiso]

Originally Posted by daveyaz So Sorry for asking again...but im in real problem... is this wire soldering method will rescue my ps3 and power on normally and then i continue one key downgrade OR flash fun method ??? Sorry again

Open a new thread describing your problem and a lot of people will help you here.

This is not a help thread Please.

[MoREL]

guys can u check my dump

i had sent it b4 5 hours ago

[MJ999]

Originally Posted by MoREL guys can u check my dump i had sent it b4 5 hours ago

YOUR DUMPS ARE NOT VALID
************* [ - Post Merged - ] *************

Originally Posted by aragorn Sent 2 of my good dumps (i think), there is only some difference here with baileyscreams guide: http://i.imgur.com/Br6PF.png Is this possible? The length of the asecure loader looks fine according to the wiki..

YOUR DUMP IS VALID

Console Info : CECH-20xx
Motherboard Model : DYN-001
HDD Info : Hitachi HTS545025B9SA00

[Crashieee]

Hello, I've sent two copies of my backup to dumpcheck @hotmail . co .uk please get back to me if it is valid or invalid? thank you.

Alixander

[3absiso]

Originally Posted by Crashieee Hello, I've sent two copies of my backup to dumpcheck @hotmail . co .uk please get back to me if it is valid or invalid? thank you. Alixander

YOUR DUMP IS VALID

ROS0/ROS1 is 4.31/4.31: Valid

tvrk_prog0 : 3.42 Valid

tvrk_prog1 : 3.41_2/3.41_DEX Valid

PS3 Model: CECH-20xx

Mobo: DYN-001

HD: TOSHIBA MK1255GSX H

[jesdaking]

I have sent a dump for checking! and need to know if the it a metldr.2?