[nick64]

Hello again.
I have this problem now. I connect my PSP to PS3 via usb and when everything is done (PSP says it's done the procces) the ps3 doesn't shut off automatically. I tried 10 times and nothing happens. Why?


My psp is 1001K model, with 5-50 GEN D-3 version.

[zeeks]

@nick64 I believe it needs to be on m33-6? I had major problems with ps3jig never working (i used a 1000k model on loads of firmwares, and ended up buying a usb stick. cheap as chips these days and worked first time!!

[nick64]

The app looks like is working and in the end is writting "Done". But I am waiting for the ps3 to shut off by itself and nothing happens... I read that many people have the same problem and some others didn't have any problem.
No I think I am in right version.

[zeeks]

Yes mine did the same. Says done, but then it doesnt do anything. The only person I know who got ps3jig to work is @playerkp420 Maybe he can help you.

Also try searching, a number of people have reported problems with the ps3jig software.

[donkey-punch]

Originally Posted by nick64 The app looks like is working and in the end is writting "Done". But I am waiting for the ps3 to shut off by itself and nothing happens... I read that many people have the same problem and some others didn't have any problem. No I think I am in right version.

you have the right model and firmware mate i use the exact same method you are trying. You need to run the jig and then power on the ps3 with power button followed by eject. Is that the way you are trying?

[nick64]

Yes. I run jig, I turn on ps3 and press the eject button and then the jig is doing some things, and that's all. The ps3 doesn't want to shut off.

[donkey-punch]

Originally Posted by nick64 Yes. I run jig, I turn on ps3 and press the eject button and then the jig is doing some things, and that's all. The ps3 doesn't want to shut off.

Have you pulled the plug from the back before you do it? Also are you pressing eject quick enough?

[nick64]

Yes to both of them.
After turning on the ps3 that is the message in my PSP screen:


"requesting jig challenge...
challenge recieved: 00 01 FF FF 2E 02 01 AA 0E 0F...
calcultaing response...
sending response: 00 01 FF 00 2E 02 02 AA AA 7D...
sent response: 00 01 FF 00 2E 02 02 AA AA 7D...
done."

And then nothing. Maybe it's something wrong with the app?

[donkey-punch]

Originally Posted by nick64 Yes to both of them. After turning on the ps3 that is the message in my PSP screen: "requesting jig challenge... challenge recieved: 00 01 FF FF 2E 02 01 AA 0E 0F... calcultaing response... sending response: 00 01 FF 00 2E 02 02 AA AA 7D... sent response: 00 01 FF 00 2E 02 02 AA AA 7D... done." And then nothing. Maybe it's something wrong with the app?

not sure what can be wrong then as I use it and get a message along them lines and it works every time.

[zeeks]

Originally Posted by donkey-punch Have you pulled the plug from the back before you do it? Also are you pressing eject quick enough?

I understood that if the jig did it's thing, then he did press eject quickly enough?

And vice versa, if he didn't press eject quickly enough, then the jig wouldn't do anything?

PS. I stick to my guns that the app is fubar'd and only works for some people.