[3absiso]

Originally Posted by John_99 so this means no hope

i think the hope is minimal.
but let us wait a little, if no one comes with a better idea. reseat the clip again and dump and wll take it from there.
the problem is that the original Dump is not valid

[haz367]

i should not interfere here..but really don't get this statement:

I tryed to brick my ps3 by flashing a bad dump

?? then also flashing prohacks dump....wich is proven it works for many(if u have ANY VALID DUMP from ur PS3) with this sort of brick(the blackscreen/no hdd activity?)

i don't like to sound like an ass, although this monday can't get any worse...so please next time before messing up like that..stop by as littlle quiker before flashing unknown stuff back to ur precious PS3

hopefully it can be fixed ofcourse..cuse perm brick aint no fun..for noone

[3absiso]

Originally Posted by playerkp420 The %'s are like you say. But when I patch it with Three Musketeers, the %'s are good. The statistic %'s have been throwing my head through loops, lately. I just did a cech-2001b today, The 00's were 36.16% and the FF's were 8.82%. It was a dyn-001 mobo. But the metldr and bootldr was saying it was either a SUR-001 or JTP-001 or JSD-001 I kept trying to reseat the clip, thinking I had a bad connection. But I didn't, same result, everytime. I asked the owner some history on the console. He said it had been fixed by Sony 2 times. I patched with rogero nor dump patcher v0.01. And the %'s were good. So I flashed it, nervous at hell, thinking it was going to brick, but it didn't. And downgraded successfully. I have seen a lot of 00's saying 18.25%, and the wiki says it should be 18.38% - 29.01%. But I also seen the wiki says this: So I think if you patch it, and you get the correct %'s, you are good to go. Now with this dump you sent me, when I patch it with the patcher from METHOD 2 of my guide, the FF's are too low from what it says on the wiki. But when I patched it with METHOD 1 of my guide (Three Musketeers), the %'s are all good. With it being on OFW 4.30, I would think that you could use that method to patch and flash. But would like to hear what you guys think. I wouldn't want to tell him to flash it and brick. Although he is already bricked?

You are right using the 3 Mas gave back good Statistics.
and i think this is his best Shot.
and yes i find the 18.25% alot these days specially with OFW 4.30 and 4.31

[John_99]

I will wait for any possible solution
My ps3 work but black screen ,no hdd activity and no power in the USB
The last thing I flashed in my ps3 was the patch dump of my original dump in flash fun

[haz367]

nvm...bad post

[3absiso]

Originally Posted by John_99 I will wait for any possible solution My ps3 work but black screen ,no hdd activity and no power in the USB The last thing I flashed in my ps3 was the patch dump of my original dump in flash fun

patch the Dump with 3 Mus patch and flash back the patched one as suggested above

[playerkp420]

Originally Posted by John_99 I will wait for any possible solution My ps3 work but black screen ,no hdd activity and no power in the USB The last thing I flashed in my ps3 was the patch dump of my original dump in flash fun

Have you tried making more dumps? Are they all the same?

If you want to try the patched bkpps3.bin that I patched with Three Musketeers, it may work.

Try at your own risk. I am really not trying to make your console any worse than it is. But since you already flashed a bad dump, I don't think it can make it much worse.
Especially since this patched dump looks to be valid. It may be just what you need.

So with that warning, if you want to try it do this:

Download REMOVED LINK - PM ME IF YOU DIDN'T GET IT.
Extract to your micro sd card and rename to bkpps3.bin.
Flash to your PS3 with all switches down.
Reboot PS3 and if it worked you will see the "Please connect controller screen"
Connect the controller and follow the on screen instructions, but with Rogero 4.30 v 2.05.

[baileyscream]

Originally Posted by playerkp420 With it being on OFW 4.30, I would think that you could use that method to patch and flash. But would like to hear what you guys think. I wouldn't want to tell him to flash it and brick. Although he is already bricked?

now as you know i'm new to the 3 musketeers patch

but if you now have what appears to be a good dump then in this situation there is only one thing for him to do.

1. re-check that clip

2. make a new dump

3. re-seat the clip again

4. re-dump again

5. open both dumps in flow rebuilder and compare them. if there the same then the clip is now known to be on correct. if not re-do steps 1-5 untill identical pair of dumps is found.

6. verify the new dump.
if it is worse than before (due to being stupid by creating a forced brick) then there is nothing to loose do step

if its better than before then stop here and get it double checked

7. flash the patched dump @playerkp420 has created (your not going to make things worse at this point)

see if it boots.

if it does stop here and let us know

8 if it didnt boot the flash the unbrick dump you got from @3absiso

9 dont turn of console but press the reset button on the E3

10 flash the patched dump from playerkp420

see if it boots

if it still doesnt then find ALL your dumps put them in 1 folder and compress it then upload them. but look everywhere for ALL your dumps.

[katsuru]

Originally Posted by playerkp420 I have seen a lot of 00's saying 18.25%, and the wiki says it should be 18.38% - 29.01%.

I did a CECH20xx yesterday, 00's = 18,25%

And I also did a CECH20xx two days ago, 00's = 18,25%

aaaaaaaaand I also did another CECH20xx some days ago, sent my dump just in case to the validation email cause my 00's were.... you guess.... 18,25%

[baileyscream]

Originally Posted by katsuru I did a CECH20xx yesterday, 00's = 18,25% And I also did a CECH20xx two days ago, 00's = 18,25% aaaaaaaaand I also did another CECH20xx some days ago, sent my dump just in case to the validation email cause my 00's were.... you guess.... 18,25%

i take it these were 4.30 or 4.31 ofw aswell then?