[3absiso]

Originally Posted by nick64 So i have to put back again the e3 flasher or not?

Till now no,
just put the PSP back.
get in FSM.
put First Self (300 KB) with regoro
Get out of FSM (Second Self 202 KB)

[nick64]

OK. I will try again.
************* [ - Post Merged - ] *************
"CONNECT THE CONTROLLER!
Put Rogero_4.30_v2.05_PS3UPDAT.PUP on your flash drive like this:
root:PS3/UPDATE/PS3UPDAT.PUP [remember to rename to PS3UPDAT.PUP]
Insert into the right usb port of the PS3 and follow the on screen instructions, hold start and select.
You will now be on Rogero 4.30 v2.05.
Try and install multiman 04.18.00 BASE or FULL package. If you receive an error, enter the recovery menu, and choose option 3. Restore file system. I have not tested enough yet, but I believe this should be done everytime. Even if you don't get an error installing packages. I think it would be a good idea to do it. Make sure to choose option 3. and not 4. or 5., because those will format your hard drive.
That is it, your done. Do not continue."

If (if) I follow this steps is it going to be alright?

[playerkp420]

Originally Posted by nick64 OK. I will try again. ************* [ - Post Merged - ] ************* "CONNECT THE CONTROLLER! Put Rogero_4.30_v2.05_PS3UPDAT.PUP on your flash drive like this: root:PS3/UPDATE/PS3UPDAT.PUP [remember to rename to PS3UPDAT.PUP] Insert into the right usb port of the PS3 and follow the on screen instructions, hold start and select. You will now be on Rogero 4.30 v2.05. Try and install multiman 04.18.00 BASE or FULL package. If you receive an error, enter the recovery menu, and choose option 3. Restore file system. I have not tested enough yet, but I believe this should be done everytime. Even if you don't get an error installing packages. I think it would be a good idea to do it. Make sure to choose option 3. and not 4. or 5., because those will format your hard drive. That is it, your done. Do not continue." If (if) I follow this steps is it going to be alright?

No. You didn't flash that patched dump.

You flashed METHOD 2 patch. Follow method 2

[nick64]

Originally Posted by playerkp420 No. You didn't flash that patched dump. You flashed METHOD 2 patch. Follow method 2

I tried 5 times and nothing. I followwd your steps from method 1 and now I am on CFW 4.30 v2.05.
But now here is my problem. Everything I start it has just a black screen. Multiman, bd games, none bd games... Everything has a black screen and I can't do anything. Any solutions?

[donkey-punch]

Originally Posted by nick64 I tried 5 times and nothing. I followwd your steps from method 1 and now I am on CFW 4.30 v2.05. But now here is my problem. Everything I start it has just a black screen. Multiman, bd games, none bd games... Everything has a black screen and I can't do anything. Any solutions?

I think your bluray logic board is not connected.
Try remarrying the bluray drive.

[nick64]

Not only the BD. With the BD and without it nothing happens. Always a black screen. I can't lunch neither multiman nor this tool box thing from Rogero...

[donkey-punch]

Originally Posted by nick64 Not only the BD. With the BD and without it nothing happens. Always a black screen. I can't lunch neither multiman nor this tool box thing from Rogero...

if the logic board is un married or the bluray drive is not connected properly no homebrew will launch. nothing at all. check all connections and if still no joy try this taken from @baileyscream guide

go https://github.com/baileyscream/Ulti...iles/downloads and download remarry-3.55.rar


extract the remarry-3.55.rar
the 3.33fw PS3UPDAT.PUP is allready in the correct folder.
in the folder there is a read me. read it
you need a blue ray film for it to work with just a blue ray game disk

PHAT ps3's will lose blueray film playback.

[playerkp420]

Originally Posted by nick64 Not only the BD. With the BD and without it nothing happens. Always a black screen. I can't lunch neither multiman nor this tool box thing from Rogero...

Did you read in my guide?

Try and install multiman 04.18.00 BASE or FULL package. If you receive an error, enter the recovery menu, and choose option 3. Restore file system. I have not tested enough yet, but I believe this should be done everytime. Even if you don't get an error installing packages. I think it would be a good idea to do it. Make sure to choose option 3. and not 4. or 5., because those will format your hard drive.

Could be your problem.

[nick64]

Well it was my BD fault. Not connected properly.
But now when i press the icon of multiman ( 04.18.00 BASE version ) it loads and then it gives me an error. (I think it's 80010017 or something like that). I can play any game in BD (I playied both pro and cod) but when I lunch multiman it gives me this error.

[donkey-punch]

Originally Posted by nick64 Well it was my BD fault. Not connected properly. But now when i press the icon of multiman ( 04.18.00 BASE version ) it loads and then it gives me an error. (I think it's 80010017 or something like that). I can play any game in BD (I playied both pro and cod) but when I lunch multiman it gives me this error.

You need to keep it switched off until you get the fan sorted otherwise you are gonna get a ylod. There will be no signs of you getting ylod until it is too late. Maybe try to get an older version of multiMAN something like 04.17.00 base first I think. But please if your fan is dead avoid switching on the console.
************* [ - Post Merged - ] *************
have a look here http://www.ps3hax.net/showthread.php?t=49724