[unigsm]

switch 100000 and ps3 keep turn on.

put original backup and micro sd card press start button.

when flashing is done dont turn off ps3. change switch to 000001

take out and transfer e3downgrade.bin to micro sd card.

put back to tf card,press reset button then press start button

8 led ok ..e3flasher.log :
Program Nor OK.

My problem:
the 8 lights goes on one by one, but i dont have a signal on the tv
ps3 does not turn off power switch

[Mr.Dutch]

Originally Posted by unigsm ps3 does not turn off power switch

if you hold the power button long enough will it shut down?

i'm a noob but i think we both know this happens because of a bad flash.

[unigsm]

if you hold the power button long enough will it shut down?
yes ps shut down :D

the 8 lights goes on one by one, but i dont have a signal on the tv ????
************* [ - Post Merged - ] *************
backup bios tested E3 Nor Dump Checker V1.0.exe ok!
why i dont have a signal on the tv ????

[Mr.Dutch]

Originally Posted by unigsm why i dont have a signal on the tv ????

yesterday i saw a thread from someone that had no video if the e3 flasher was connected, removing it would restore video...

can't find the actual thread....

[katsuru]

Originally Posted by unigsm if you hold the power button long enough will it shut down? yes ps shut down :D the 8 lights goes on one by one, but i dont have a signal on the tv ???? ************* [ - Post Merged - ] ************* backup bios tested E3 Nor Dump Checker V1.0.exe ok! why i dont have a signal on the tv ????

Did you validate your dump?

Either send it to the validation thread or send it to me I will check it for you.
************* [ - Post Merged - ] *************
Here is the thread that @Mr.Dutch means:

http://www.ps3hax.net/showthread.php?p=527100

[Sasuke1981]

Mmmm i smell bad dump ...happened to me 1 time with a ps3 cause i Was on rush and i permabricked...dont Wanna be' an ass but i think You can sell it like this ...but lets see what other people says

[katsuru]

Originally Posted by Sasuke1981 Mmmm i smell bad dump ...happened to me 1 time with a ps3 cause i Was on rush and i permabricked...dont Wanna be' an ass but i think You can sell it like this ...but lets see what other people says

First some1 hast to check that dump out, lets say hes lucky and made a perfect dump, and somehow after that the clip moved and its sitting wrong now not being able to flash properly ?

Some people are lucky like that, lets wait and see

[unigsm]

E3 Nor Dump Checker V1.0.exe


Verification completed successfully
E3 Dump has been verified with no errors.

[MJ999]

You manually verified your dump ? Not using e3 dump checker using HxD



UPDATE : Your dump seems to be valid.

Did you byte-reversed your dump before patching it?

[unigsm]

Using autopatcher from Flow Rebuilder:

select "PATCH a Byte reversed NOR dump or an interleaved and unscrambled NAND dump."
Select as Input Dump File the unmodified dump
Select as Patch file: E3-downgrader\progskeet_patch.txt

Use the patched file, rename to bkpps3.bin, put on SD and use E3 to flash the ps3. To flash a manually patched backup put all the switches on the flasher down and press start while in the XMB


''i dont have a signal on the tv
ps3 does not jb test mode''