[3absiso]

Originally Posted by katsuru I got it mate, its running ^^ Ok now how do I proceed ?

Flash your original Dump in Fun flash, then you flash the patched Dump with one key flash (all down or all down except the 6 up)

Can you send me your Dump to check it

[Redouan14]

Originally Posted by ZeroCold Hi all. I have a bad story for my PS3 2508A DATA CODE 1A (OFW 4.31 , 3.56 on factory) 1.make good dump via E3 flasher. 2.try make downgrade dump and write it in my PS3, but it not work for 4.31 3.write back my original dupm and PS3 working fine! BAD STORY 4.I make downgrade dump for 4.30 and write via E3 flasher. 5.rename down425to355.pup to PS3UPDAT.PUP and make update in recovery mode! (my mistake) 6.PS3 is breaked! 7.Now i write good original dump but PS3 is not working! 8.Now after write dump for downgrade for 4.30 I have request 4.40 or high FW. Installation begin only on down425to355.pup(after rename ofcouse) file, other PUPs not working! I think down425to355.pup make changes for SYSCON. Any body know how I can fix it?

1. Turn off Playstation®3.

2. Hold The power button down; The system will turn on and turn off once again.

3. Once the System has been shutdown, re-press you finger until you hear 2 consecutive beeps

4. When you hear the 2 beeps take finger off power button.

5. You will be promted to plug in your controller via usb and then hit the PS button.

6. The Recovery menu will pop up.

7. Download OFW put it in your usb then click Ps3 Update.

8. Enjoy XD
Do this it worked for me

[haz367]

must be reading to much atm.... need to stop it a bit cuse i don't get this part
@3absiso ..

flash the patched Dump with one key flash (all down or all down except the 6 up)

never seen it or done like that...and dont forget i'm just asking..

a patched dump we always do with all switches down or first up if ps3 rlod's
and the onekey e3downgrade bin is used with switch 6 up(+the original bkpps3.bin) rest down/or first up..depens right... u saying here u can flash patched dump with switch6 up? is this only patched dump(bkpps3.bin) or in combo with e3downgrade.bin? there alot of ways fixing...but it really confuse me this post, thx anyway

[3absiso]

Originally Posted by haz367 must be reading to much atm.... need to stop it a bit cuse i don't get this part @3absiso .. flash the patched Dump with one key flash (all down or all down except the 6 up) never seen it or done like that...and dont forget i'm just asking.. a patched dump we always do with all switches down or first up if ps3 rlod's and the onekey e3downgrade bin is used with switch 6 up(+the original bkpps3.bin) rest down/or first up..depens right... u saying here u can flash patched dump with switch6 up? is this only patched dump(bkpps3.bin) or in combo with e3downgrade.bin? there alot of ways fixing...but it really confuse me this post, thx anyway

What you are saying is correct;
but the guy knows how to use the flasher and knows when to use One key or all switches down.
that's why i said or , so he to decide, i have should be more clear about it

[haz367]

no probs...i must have misread the post...nvm..thx for verify!

[katsuru]

Originally Posted by 3absiso Flash your original Dump in Fun flash, then you flash the patched Dump with one key flash (all down or all down except the 6 up) Can you send me your Dump to check it

After an extreme fight with soldering ( Broke my SBE on e3 ribbon ), I soldered Nor tri to GND on board, flashed my dump patched by Rogero patcher, and went to FSM and did the whole process from there, console is now installing rogero 4.30 v205

Thanks for your help guys.

[saqibmush]

Originally Posted by katsuru After an extreme fight with soldering ( Broke my SBE on e3 ribbon ), I soldered Nor tri to GND on board, flashed my dump patched by Rogero patcher, and went to FSM and did the whole process from there, console is now installing rogero 4.30 v205 Thanks for your help guys.

guyz i flashed again using flash fun mode with original dump..
now when i switched it on MY console is in Factory Service Mode....
What to do after this...

HELP...guide me what to do ..console is FSM Mode n Firmware is 4.31

[razblade77]

Originally Posted by saqibmush guyz i flashed again using flash fun mode with original dump.. now when i switched it on MY console is in Factory Service Mode.... What to do after this... HELP...guide me what to do ..console is FSM Mode n Firmware is 4.31

u cant be in fsm mode unless u used a usb stick with right right files on there, insted of asking guys what to do next why dont follow the guide?

[godking666]

look stop giving the guy a hard time hes clearly new. try finding a friend with the exact console. same model number and all. do his. and DO THAT STEP LOL. then try using that one to restore yours. and nor/nand can be rebilt its just a bugger. excuse him for being rude, we can get it up again somehow... just gonna take some work and ill need alot of info. try that first step first tho. also you still have the unvalidated dump? ive got a modded console and downgrade setup too
************* [ - Post Merged - ] *************
lol look through the forum and get back if you cant find it tho btw. fsm has a way out if yo have a card reader :P if not your gonna need to rebuild the prog and flash it to a ofw like 3.55. but i suspect you dunno how. it seems like you are trying to launch a rocket but you are a pilot? :P
************* [ - Post Merged - ] *************
raz that is untrue i somehow entered fsm mode once. without a usb stick. and i wasnt supposed to either it glitched during a downgrade/jb process. it just doesnt happen often. and it was a royal pain to get outta it. luckily i was 3.55

[saqibmush]

Originally Posted by godking666 look stop giving the guy a hard time hes clearly new. try finding a friend with the exact console. same model number and all. do his. and DO THAT STEP LOL. then try using that one to restore yours. and nor/nand can be rebilt its just a bugger. excuse him for being rude, we can get it up again somehow... just gonna take some work and ill need alot of info. try that first step first tho. also you still have the unvalidated dump? ive got a modded console and downgrade setup too ************* [ - Post Merged - ] ************* lol look through the forum and get back if you cant find it tho btw. fsm has a way out if yo have a card reader :P if not your gonna need to rebuild the prog and flash it to a ofw like 3.55. but i suspect you dunno how. it seems like you are trying to launch a rocket but you are a pilot? :P ************* [ - Post Merged - ] ************* raz that is untrue i somehow entered fsm mode once. without a usb stick. and i wasnt supposed to either it glitched during a downgrade/jb process. it just doesnt happen often. and it was a royal pain to get outta it. luckily i was 3.55

im in FSM mode guyz beleive me whenever i switch on my console there is a RED box on XMB PS3 Factory/Service Mode