[digiprog]

maybe of topic * NAND dump remaping for bad blocks ?
it's a good idea :P but maybe hard i don't know ..
but thanks @anaria for the great job u did

[Sarah1331]

Originally Posted by digiprog maybe of topic * NAND dump remaping for bad blocks ? it's a good idea :P but maybe hard i don't know .. but thanks @anaria for the great job u did

Now there's a real proper idea


Sent from my iPhone 5 using Tapatalk

[3absiso]

Originally Posted by digiprog maybe of topic * NAND dump remaping for bad blocks ? it's a good idea :P but maybe hard i don't know .. but thanks @anaria for the great job u did

Will, I am getting NAND PS3s, but thankfully without Bad Blocks till now.
i think it is good idea, it can be done but again i do not know how difficult it would be.

[baileyscream]

Originally Posted by defyboy Thank you for this most useful tool, I'm glad my painstaking reverse engineering and documentation came in handy for someone. I would like to upload this to the wiki's download section if you don't mind. Also, just a comment on checking the 0x00 and 0xFF areas, I have a few samples where areas that usually are 0xFF are indeed 0x00. I am not sure what conditions cause this but I assume it's from different boundaries from previous firmwares. Basically, areas that are 0xFF will be so because NOR flash memory in it's "erased" state contains all 1's, a write operation is able to change a 1 to a 0 however a block erase operation is required to revert 0's to 1's. Areas that are 0x00 are simply where blank data has been written over an erased block, usually to fill up a boundary. As for a final report, it would be nice to give a pass or warnings on what specific parts of flash are incorrect.

is the download section getting re-opened then?
otherwise its a bit pointless moving it there if it cannot be accessed.

^^^dont take that as a piss take or anything. its just a question

[arcadekidflo]

I'm having an error when running the program , any ideas ? Win 7 , 32bit

[anaria]

Originally Posted by arcadekidflo I'm having an error when running the program , any ideas ? Win 7 , 32bit

Honestly no, is it a binary you've download ? which one?
or did you compile it? then did you change anything in the code?

[arcadekidflo]

It's version 0.9.5 linked to in the first post

[Sarah1331]

Originally Posted by arcadekidflo It's version 0.9.5 linked to in the first post

You didn't call a dump to open with it


Sent from my iPhone 5 using Tapatalk

[anaria]

Originally Posted by arcadekidflo It's version 0.9.5 linked to in the first post

I've not used the proper environment to compile it, therefore some dependencies are missing, see Post #55 from @3absiso and #57 from @guerrierodipace .

Eventually DLLs are present but not the correct version?

Originally Posted by Sarah1331 You didn't call a dump to open with it

Should not be, as in the case of the app having no parameters it displays the help.

[arcadekidflo]

Version 0.9.4 works for me . Whatever you changed between 0.9.4 and 0.9.5 causes it not to work on some systems .