[godking666]

no it was just missing details.. its already been settled btw lol let it go

[haz367]

Originally Posted by 3absiso Two days in a roll will the net was disconnected all day on me, it came an hour ago. did i miss something?

not me..hehe...i have a good day sir the english again ...let's keep it at "we have all our bad day..or for girls out there..time of the month )

but this was nothing..it's all good...u didn't mis anythin


ok, cuse the guy @saqibmush looks to have a FSM mode problem on OFW 4.31 and PM'd me i like to put it here for clarity and...then he must have not "exited" before he fixed/restored with OFW 4.31 dump?!

only thing i can think here as a solution: (may work or not!) this is guessing as never entered/had FSM running above 3.55 u must have triggered FSM somehow with a pkg or the dongle and never exited it then repaired it with OFW 4.31 dump that was succesfull but result = FSM still set someone correct me wrong, i have "compared" previously a 355 dump against a 355/FSM running dump, they are alike, so the FSM isn't set on the NORflash possible fix: downgrade as usual using the 355 patches (either patched OFW 4.31 dump or default e3 way = OFW 4.31+e3_downgrade.bin) [b]FSM mode is already set[/b[ at this stage, so a reboot should give (in my theory) the connect controller screen, pull powercord out/back in, and finish it of with USB stick on root: "enter" lv2diag.self+Rogero 3.55 3.7 MD5: 8f8166b25d6bed891f292c77de5c4b28 let it do its thing and exit FSM with the "exit" lv2diag.self use at ur own risk NOTE: there are Pro people doing this like that, or atleast one so he told me via email = setting FSM before the "downgrade" and exit after the full downgrade/dehash

Originally Posted by saqibmush i need ur help man.. my console got bricked i flash fun my console with original dump successfully but now whn i start my console it is in FSM mode with 4.31 Firmware. Now what should i hav to do..do i hav to install the patched dump now or ill have to do anything else man.. please help me man i am stick with that from many days help me out plz... my goal is not to get out of FSM mode my goal is to install any CFW in my console so what should i do for it...i hav e3 flasher with which i had created original dump...my console got bricked n i debricked it using original dump in flash fun mode..now it enterd in a FSM Mode with having 4.31 Firmware

[saqibmush]

Originally Posted by playerkp420 @saqibmush If you want to unbrick your PS3, I can help. 1. Do you have a valid dump? Did someone double check it for you? 2. Did you already solder a wire to keep your PS3 on? tristate to ground or tristate to sbe? If the answer is yes to both of those, Then follow method 2 or method 3 of the guide below. If you are in FSM mode already, then skip the step to enter FSM. After cutting the power insert the USB with the PUP and Lv2diag.self. If you soldered tristate to ground, then you will have to remove the wire after you flash the patched dump. Or if you soldered to sbe, you will need to have the first switch up, when you flash the patched dump. Not all down like the guide says. Then after flashing the patched dump, put all switches down and continue with the guide.

thanx for ur assistance man..its 4 AM here i waited for ur suggestnz ...
i had a valid dump..i had doubled checked it from three people .
i had soldiered the wire from tristate to sbe for flashfun method.. after flash fun i disconnected it..now what i would have to do is..

as i am already in FSM mode
first flash the patched dump with first switch up
n than all switches down,,
After cutting the power insert the USB with the PUP and Lv2diag.self.
n than exit lv2diag.self

am i right..?

[playerkp420]

Originally Posted by saqibmush thanx for ur assistance man..its 4 AM here i waited for ur suggestnz ... i had a valid dump..i had doubled checked it from three people . i had soldiered the wire from tristate to sbe for flashfun method.. after flash fun i disconnected it..now what i would have to do is.. as i am already in FSM mode first flash the patched dump with first switch up n than all switches down,, After cutting the power insert the USB with the PUP and Lv2diag.self. n than exit lv2diag.self am i right..?

Yes, that is it. Because you are on OFW 4.31 and in FSM, right?

[haz367]

Originally Posted by saqibmush thanx for ur assistance man..its 4 AM here i waited for ur suggestnz ... i had a valid dump..i had doubled checked it from three people . i had soldiered the wire from tristate to sbe for flashfun method.. after flash fun i disconnected it..now what i would have to do is.. as i am already in FSM mode first flash the patched dump with first switch up n than all switches down,, After cutting the power insert the USB with the PUP and Lv2diag.self. n than exit lv2diag.self am i right..?

u see i was right last night..i hope u brick it..yes lowering myself now a tad..u sire are one f*cking ignorant ****...go brick it..ot troll somewhere else...

[godking666]

im pretty sure thats what i said also i just forgot to add the pup file with the self file to the usb lol

[haz367]

lurk mode off..he's an ass..troll nr 5644779465436 get it
hope he bricks again..some do deserve ...ok lurk mode on from now...u win

[saqibmush]

Originally Posted by playerkp420 Yes, that is it. Because you are on OFW 4.31 and in FSM, right?

yes iam in the FSM mode with OFW 4.31

[haz367]

player be wise or i declare all people from US .... guys from the US of dumbf*cks
u got a natte plasser already smushy...

[saqibmush]

i am a student of management.. i don't knew much about that ****...i had only downgraded only one console an year ago...after a gap of a year i tried to downgrade another console for my brother as hacked console was unavailable here in my country n if it is than it costs higher than the sony's new consoles..i also had e3-flasher n card reader lying in my cupboard so i tried spent ma vacations on downgrading this console...
Soor Guyz it was difficult for me to understand ur technical terms n language n i had bricked that console twice...n also given it a new life twice..