[4DoorITR]

You'll need to keep reseating the clip until it detects the NAND. It's a infuriating process.

[John_Freeman646]

Originally Posted by 4DoorITR You'll need to keep reseating the clip until it detects the NAND. It's a infuriating process.

Im dumping one of the NANDs (bottom one that need modification to the clip) but it says its failing verification on each block in Winskeet is that normal?

[4DoorITR]

No that is not good. I see you are using a clamp so the only thing I know to say is keep trying to hit the sweet spot on where the clip sits.

[John_Freeman646]

Originally Posted by 4DoorITR No that is not good. I see you are using a clamp so the only thing I know to say is keep trying to hit the sweet spot on where the clip sits.

Damn... I am using a clamp. So I guess just reseat it untill it works?

[Sarah1331]

Originally Posted by John_Freeman646 Damn... I am using a clamp. So I guess just reseat it untill it works?

Not too tight either

I have had two consoles that when I used a clamp it wouldn't detect but when I just rest the clip it read so its possible to over tighten start with a little force and increase slowly


Sent from my iPhone 5 using Tapatalk

[John_Freeman646]

I really have no idea what im doing wrong. Ive been trying to get the Clip to read the NAND for hours and Ive gotten the bottom NAND to read 2 times and each time the dump was not verifying right and the top NAND wont read cause I keep getting random nubers and letter for it in winskeet. Im almost at the point where I just wanna sell my progskeet and stuff and get someone else to downgrade it for me. (Just wondering is there anyone who downgrades in British Columbia Canada)?

[jensen76]

have you cleand the nand chip and clip whit alcohol?

[John_Freeman646]

Originally Posted by jensen76 have you cleand the nand chip and clip whit alcohol?

Like almost 8 times yes

[jensen76]

try an old pc whit xp... ore try bitstreem ProgSkeet_12_121018_0031 the green light on the slave board needs to be off to get it to read of nand A if im not mistaking. what nand does wingskeet tell you? i have had 2 CECHG04 whit 2 different nand chips showing in wingskeet EFC1801540 and EFC1009540...

i had to use an old pc to get it to read my nand chips.