[playerkp420]

Originally Posted by salomon890 it was bricked anyway.i still got the dump from this ps3,so i can flashed back any time.Problem is it was already bricked when this customer bring it to me,so i extracted dump form one already bricked ps3. playerkp420 i did this in the past with succes.flashed with donor nand ,wasn't worked,so used again original dump,which was ok ,ps3 worked normal,so is not toasted. I experienced this so if you have original nand dumps and use a skeet should be no issue if you flash back the nands.I'm not sure with the nor ,but with nand worked just fine.

You weren't clear on if you had a dump from it. Have u tried patching that dump with flowrebuilder, then flashing the patched dump?

[salomon890]

yes,but this ps3 was already bricked.The owner tried some mumbo-jumbo software and it bricked his ps3.Of course i make the dumps and tried to unscramble with flowrebuilder ,but it gives me the errors,extracted all,less the ctvrm ,so it was only 10 ,not 11 in folder 1.ext.
Of course the scrambled bin looks fine with verifyng against table,but i know from my previous flashed ps3's with issues,if 1.ext is not complete ,it will not work.
i will try despite the facts from above and errors which flowrebulider give it to me,to flash the patched dumps,but im not very optimistic,about the results.In the worst scenario i still have the original dumps and i get some more experience.