[haz367]

great Nicolas19, if u dont mind, i'll drop here some more tests with the flags and the Core's cellftp.self's, they are ALL different, meaning the one included with the "disabler" have another MD5 checksum then the UPDATE 5 cellftp.self, not sure atleast they are not the same

did some fooling around with "anotherlv2" flag and lv2kernel on dev_flash, it keeps repeating the "flag" with green led = no lv2kernel loaded?!

update5 cellftp.self_2 files replace:

MD5: cd59c91aba161d01f842b36525a138c8

Core: Mount dev-rewrite Result (0x00000000)
replacing files on dev_flash...
replacing files on dev_flash...

_init.log
SUCCESS!
SUCCESS!


-------

flag "anotherlv2" loaded with "cellftp.self update 5 md5: cd59..
lv2kernel not on dev_flash

Core: Changing led and continue boot 
Core: Still running on background , see you later :-D
Core: Mount dev-rewrite Result (0x00000000) dev_flash mount folder e.g like dev_blind/dev_rebug)
loading 2nd kernel from dev_flash...


flag "anotherlv2" loaded+rex4.21.2 lv2_kernel.self on dev_flash  (gr led, the flag keeps repeating-power of front, reboot normal)

Core: Still running on background , see you later :-D
Core: Installing lv1 peek / poke driver 
Core: Enable fself Called!!! (WRITE_EPROM) Result (0x00000000)
Core: Installing lv1 peek / poke driver 
Core: Enable fself Called!!! (WRITE_EPROM) Result (0x00000000)
Core: Mount dev-rewrite Result (0x00000000)
Stuck on loading 2nd kernel from dev_flash...

************* [ - Post Merged - ] *************
FSM test using UPDATE 5 Core 2.70 cellftp.self+exitfactory flag

Trigger FSM
Power off/on the PS3 at the back (switch/cable)
Enable FSM mode by quikly pressing "power+eject" in sequence as fast possible
The PS3/cfw 4.31 does the magic, be patient..the console powers off by itself in about "1min"
Boot the PS3 into FSM

Tested here..a fixed "FactoryServiceMode.gnpdrm.pkg" thinking it would boot FSM and also get out(would be faster), it booted back to xmb..

Ok, to get out of fsm properly, use the USB with the core loaded:

dev_usb000
flags folder with flag "exitfactory"
cellftp.self (update 5)
copy_script.txt (empty)

boot the ps3
the leds start to blink(it blinks constant while '"flag/ps3" is running") .. it boots u into fsm again, power down the ps3 normal way and reboot into xmb



there's a game controller "unsync" bug"
the translate was ment for a bddrive or some.
the controller gets unsynced.. e.g power off/on with controller = unsynced, only the toothpick can fix

[ICECOLDKILLAH]

update 6 is out (core 2.7.1)

changes:

- better psx compatibility

contains older updates

http://www.mediafire.com/?c4kkvhyti05iv5q

[toolz]

Is this now better than what kmeaw is in its present state?

[rexboys10]

Pleasseeeeee REUPLOAD LINKS , ITS DEAD. I LOVE YOU

[3absiso]

@Nicolas19
some Links are Dead

[Nicolas19]

what links are Dead?

[3absiso]

Originally Posted by Nicolas19 what links are Dead?

The main link (CFW)

[hykbooks]

hello there since i am a newbie i just upadted to tijera cfw 4.3.1 without doing step 3 ( Step 3: Cinavia protection disabled+ReactPSN activated+better PSX compatibilityis )

that ok, and what will miss if i dont do step 3, please in simple words as i am still learning

[Nicolas19]

Tutorial Updated:

*Added 8 new mirrors For MiralaTijera CFW 4.31 v2
*Added CORE v6
*Step 3 Updated
*Added Extras v2 Package

[3absiso]

Originally Posted by Nicolas19 Tutorial Updated: *Added 8 new mirrors For MiralaTijera CFW 4.31 v2 *Added CORE v6 *Step 3 Updated *Added Extras v2 Package

Thanx.
Question: in case i wanted to go back to Rogero CFW 4.30 or 3.55. is it possible with this CFW or what?