[DEFAULTDNB]

@haz367 Could explain the "80010017" error code

EAUTHFAIL 0x80010017 Failure in authorizing SELF. Program authentication fail (Error starting BluRay game)

[Sorah]

Originally Posted by DEFAULTDNB Sorry to interject, I have what could be a silly question, and perhaps I have missed something: @Sorah never specified what PS3 model they have, so how do we know they CAN downgrade to 3.55 to dehash? If the min FW praxis is 3.56+ then how can they dehash? (just read through @Sorah s old posts and dont see a mention of a PS3 model)

I'm actually a her ^^

My model is: CECH-2004B

[DEFAULTDNB]

Originally Posted by Sorah I'm actually a her ^^ My model is: CECH-2004B

<whoops misread the post>

At least we know your Model can be downgraded so my question is moot

[haz367]

uhm...wait...ur already on rebugs 3.55.4_999_downgrader??! or still at Rogero 4.xx? then the error is there..8000100017 can be a couple different problems..normally with a homebrew it needs resigning for 4.xx(=old 3.55 homebrew) or the bd drive...

e.g on 4.31CFW the zen pinball 2 kicks back with this error - 800010017
update the PSN game with the game update and game runs fine....

the 2004B is min 2.70 or so..no problems in going back to 3.55 on it

make sure ur on 3.55.4_999 downgrader and enable QA via the toolbox
not working?

[Sorah]

Isn't there another possibility? Like going through the whole musketheers process again or wiping the hard drive?

I don't know what to do about this error. I'm able to open IrisManager and multiMAN but I can't open Toggle QA or Package Manager 0.9
************* [ - Post Merged - ] *************

Originally Posted by haz367 uhm...wait...ur already on rebugs 3.55.4_999_downgrader??! or still at Rogero 4.xx? then the error is there..8000100017 can be a couple different problems..normally with a homebrew it needs resigning for 4.xx(=old 3.55 homebrew) or the bd drive... e.g on 4.31CFW the zen pinball 2 kicks back with this error - 800010017 update the PSN game with the game update and game runs fine.... the 2004B is min 2.70 or so..no problems in going back to 3.55 on it make sure ur on 3.55.4_999 downgrader and enable QA via the toolbox not working?

I'm on MiralaTijera 4.31 that I installed with the Musketheers.
I only get the error when I try to run Package Manager or Toggle QA.
Then I run BF3 or other things like multiMan there is no error.

[haz367]

wait..dont screw up anymore then required....

ur at 3.55.4_999 now?
go into the "install packages" on XMB(rebug has it as Package manager" instead)
go into it..Install package files>PS3 Hard Disc>Rebug Toolbox 2.01.00
install the PKG
run it and skip to latest column....

verified and working on 3.55.4_999 and Toolbox - enable QA/disable QA

check screenshots>>

[Sorah]

Originally Posted by haz367 uhm...wait...ur already on rebugs 3.55.4_999_downgrader??! or still at Rogero 4.xx? then the error is there..8000100017 can be a couple different problems..normally with a homebrew it needs resigning for 4.xx(=old 3.55 homebrew) or the bd drive... e.g on 4.31CFW the zen pinball 2 kicks back with this error - 800010017 update the PSN game with the game update and game runs fine.... the 2004B is min 2.70 or so..no problems in going back to 3.55 on it make sure ur on 3.55.4_999 downgrader and enable QA via the toolbox not working?

I can't get on 3.55.2 999 because I can't start the Toggle QA
When I start the toolbox I get the message: "Your system is not running on compatible REBUG configuration!"

[haz367]

I'm on MiralaTijera 4.31 that I installed with the Musketheers. I only get the error when I try to run Package Manager or Toggle QA.

u cannot run/set QA these on 4.31.....first go back to 3.55.4_999
http://rebug.me/rebug-3-55-3-and-4-2...99-downgrader/
************* [ - Post Merged - ] *************

Originally Posted by Sorah I can't get on 3.55.2 999 because I can't start the Toggle QA When I start the toolbox I get the message: "Your system is not running on compatible REBUG configuration!"

u can run toolbox on 4.31CFW just fine with that error = no supported firmware, it ofcourse disables "most" settings but e.g booting otheros/making a flash backup works fine

u must first go to 3.55.4_999 before running the Toolbox and QA to get Toolbox full settings working pls re-read the posts

[Sorah]

Originally Posted by haz367 u cannot run/set QA these on 4.31.....first go back to 3.55.4_999 ************* [ - Post Merged - ] ************* u can run toolbox on 4.31CFW just fine with that error = no supported firmware, it ofcourse disables "most" settings but e.g booting otheros/making a flash backup works fine u must first go to 3.55.4_999 before running the Toolbox and QA to get Toolbox full settings working pls re-read the posts

Sorry for that. I couldn't download the .pup file, that confused me a lot. But now I've downloaded it.

should I "install" it on the XMB or do I have to boot to the recovery menu?

Thank you again

[haz367]

just install the "3.55.4_999" downgrader from XMB-system update ( no discs in drive!)
after ur on this hybrid 3.55 from rebug, make a flash backup using the latest Toolbox..always make a backup of nor/nand flash" after changing firmwares...

once ur on the 999 one, fireup Toolbox and "enable" QA in the last column..check the pictures ^

then after that u can dehash with Rebug 3.55.4 via the XMB-system update! or e.g OFW3.55/kmeaw etc.. from the Recovery menu instead!