[katsuru]

Originally Posted by xAfgkiller96x I will try to dump now ************* [ - Post Merged - ] ************* Can you check my second dump please ? HERE THE LINK: http://www.mediafire.com/download.php?pbslo7k96ixzxe3 @baileyscream @Mr.Dutch @katsuru @playerkp420

Your dump is NOT VALID

mate, put some 1cent coins on top of the clip, with some "Tesa film" ( glue band I dunno the name of it in english ), that way the clip will be pressed down. and redo the dump please.
************* [ - Post Merged - ] *************

Originally Posted by baileyscream take the link down send it to dumpcheck @hotmail .co.uk << no spaces

dont need, it does not even extract.

[xAfgkiller96x]

Originally Posted by katsuru Your dump is NOT VALID mate, put some 1cent coins on top of the clip, with some "Tesa film" ( glue band I dunno the name of it in english ), that way the clip will be pressed down. and redo the dump please. ************* [ - Post Merged - ] ************* dont need, it does not even extract.

i will make an other dump i forgott to update , it gives me
1. this error code 0 1 0 0 1 0 0 0 Failed to open TF card SD card not seated properly
- i put it out and than in


tried again 2.
0 1 0 0 0 0 0 0 Failed to initialize TF card SD card not seated properly

i format the sd card and than it gives me
3. this errorcode : 1 0 0 0 1 1 0 0 Failed to initialize PS3 BIOS Check pads / clip at PS3 board check may not be properly seated
@baileyscream

[baileyscream]

@xAfgkiller96x
can you validate it yourself first
it will make all this so much simpler as you will see there is still a problem with your clip if you cannot validate it first.

then once you have what looks like a good dump THEN ask us to check it for you
************* [ - Post Merged - ] *************

Originally Posted by xAfgkiller96x i will make an other dump i forgott to update , it gives me 1. this error code 0 1 0 0 1 0 0 0 Failed to open TF card SD card not seated properly - i put it out and than in tried again 2. 0 1 0 0 0 0 0 0 Failed to initialize TF card SD card not seated properly

format [full format] your card in the pc then try it again
************* [ - Post Merged - ] *************

Originally Posted by xAfgkiller96x i format the sd card and than it gives me 3. this errorcode : 1 0 0 0 1 1 0 0 Failed to initialize PS3 BIOS Check pads / clip at PS3 board check may not be properly seated @baileyscream

yes
your dumps are bad
so your clip is not on correctly
it may even be too deep.
or the clip could be sat on a tiny component next to the nor.
take some pics of the NOR and of the clip attached and post them here
if we can see then we can help
but this is going round and round in circles now.

post some pics

[xAfgkiller96x]

Originally Posted by baileyscream @xAfgkiller96x can you validate it yourself first it will make all this so much simpler as you will see there is still a problem with your clip if you cannot validate it first. then once you have what looks like a good dump THEN ask us to check it for you ************* [ - Post Merged - ] ************* format [full format] your card in the pc then try it again ************* [ - Post Merged - ] ************* yes your dumps are bad so your clip is not on correctly it may even be too deep. or the clip could be sat on a tiny component next to the nor. take some pics of the NOR and of the clip attached and post them here if we can see then we can help but this is going round and round in circles now. post some pics

http://img5.fotos-hochladen.net/uplo...wr5y3sthp8.jpg

http://img5.fotos-hochladen.net/uplo...68mpryhsw0.jpg

[katsuru]

Originally Posted by xAfgkiller96x http://img5.fotos-hochladen.net/uplo...wr5y3sthp8.jpg http://img5.fotos-hochladen.net/uplo...68mpryhsw0.jpg

its a phat, slide the flasher completely into the HDD connectors, and then put the front panel in, does not have to be completely attached.

I always get SD card problems on phats when my flasher is not completely fited in the HDD connectors.

[xAfgkiller96x]

Originally Posted by katsuru its a phat, slide the flasher completely into the HDD connectors, and then put the front panel in, does not have to be completely attached. I always get SD card problems on phats when my flasher is not completely fited in the HDD connectors.

My 3. dump is also not valid -.-

[katsuru]

Originally Posted by xAfgkiller96x My 3. dump is also not valid -.-

Keep trying, or send it to me if you think you can't do it yourself.

Did you check your flasher to see if it is original?

E3-tech website has some pictures that help identifying original flashers.

[xAfgkiller96x]

Originally Posted by katsuru Keep trying, or send it to me if you think you can't do it yourself. Did you check your flasher to see if it is original? E3-tech website has some pictures that help identifying original flashers.

yes , its original ,
but i have 4gb sd card is that the problem mayybe?

[katsuru]

Originally Posted by xAfgkiller96x yes , its original , but i have 4gb sd card is that the problem mayybe?

I also flash with a Sandisk 4gb.

No that should not be the problem as your flasher writes on the card.

[xAfgkiller96x]

OMG , i cant do anything ... **** e3 flasher
thanks for your help
do you know what can i do?