[x7desu]

Looks like the brick was caused by bad dump:
ps3hax.net/showpost.php?p=538332&postcount=413
tvrk_prog0 : Not Valid

When restore original dump or dump patched by PS3 Nor Dump Patcher v0.01 under Flash Fun mode, system turns on (screen is black), but not enters to FSM or Recovery menu. Same when use e3_downgrade.bin patching by flasher.

Is there any way to restore system?

[digiprog]

@x7desu @baileyscream is the ultimate person that would help you in this..

but try to reseat the clip well and clean the nor legs .. maybe if it was not vaild then it didn't read well .. so it didn't write the tvrk_prog0 dump at least 5 dumps and see if its still not vaild .. but dont write anything now ! just try to dump

[x7desu]

You mean, @baileyscream ?

My PS3 is already bricked, then I read firmware that I flashed, it is same.
Strange, that I maked original dump 2 times with removing clip, but dumps are same.

[3absiso]

Originally Posted by x7desu You mean, @baileyscream ? My PS3 is already bricked, then I read firmware that I flashed, it is same. Strange, that I maked original dump 2 times with removing clip, but dumps are same.

Hey My Friend;
First we have to make sure the clip is secure,
first flash back your original dump then pack it up again if they match then the clip is secured correctly.
then Try to flash your original Dump Via Fun Flash,
then flash it back via (all switches down), and look what happens. if still nothing.
patch your dump via Rogero and flash it with all switches down.

[baileyscream]

Originally Posted by 3absiso Hey My Friend; First we have to make sure the clip is secure, first flash back your original dump then pack it up again if they match then the clip is secured correctly. then Try to flash your original Dump Via Fun Flash, then flash it back via (all switches down), and look what happens. if still nothing. patch your dump via Rogero and flash it with all switches down.

no
dont flash it back
he has said its a bad dump!
************* [ - Post Merged - ] *************

Originally Posted by x7desu Looks like the brick was caused by bad dump: ps3hax.net/showpost.php?p=538332&postcount=413 tvrk_prog0 : Not Valid When restore original dump or dump patched by PS3 Nor Dump Patcher v0.01 under Flash Fun mode, system turns on (screen is black), but not enters to FSM or Recovery menu. Same when use e3_downgrade.bin patching by flasher. Is there any way to restore system?

stop flashing the ps3 with a bad dump.
do a new dump as it is now. rename it test 1.bin
you need to re-seat the clip
then do a dump
compare it to test 1
your looking for a dump that is different from that test 1 dump.

if its the same then re-seat the clip again
and do another dump.
if its not different then i think you will need to solder the linker to the ps3's test points.
but remember dont flash anything.

[3absiso]

Originally Posted by baileyscream no dont flash it back he has said its a bad dump! ************* [ - Post Merged - ] ************* stop flashing the ps3 with a bad dump. do a new dump as it is now. rename it test 1.bin you need to re-seat the clip then do a dump compare it to test 1 your looking for a dump that is different from that test 1 dump. if its the same then re-seat the clip again and do another dump. if its not different then i think you will need to solder the linker to the ps3's test points. but remember dont flash anything.

i checked his dump @baileyscream and it was OK but trvk_prg not valid, i recommended to update via XMB and Recovery but he told me that the Console is already bricked and can not get get another dump. and he flashed in fun flash.
i patched his dump with rogero and it could fix his travk_ \prog problem.
thys why i told him to do so

This is my original Post

This is his reply

[baileyscream]

Originally Posted by 3absiso i checked his dump @baileyscream and it was OK but trvk_prg not valid, i recommended to update via XMB and Recovery but he told me that the Console is already bricked and can not get get another dump. and he flashed in fun flash. i patched his dump with rogero and it could fix his travk_ \prog problem. thys why i told him to do so This is my original Post This is his reply

oh! if you find anything wrong with a dump just flag it as invalid.
dumps can be made all day but if a section that is not encripted is not valid then you can be sure a section that is encripted will also be not valid (you just cannot read it to tell)
also it is a sign that a clip or wires are faulty
so flashing back can / will flash correct data in the wrong areas or wrong data in correct areas.
do you follow what i meen?

but regardless now.
it was flashed back before he recived a report.

@x7desu follow what i have posted above. dont flash it anymore just dump.
we need to get a better dump if possible

[Mr.Dutch]

Originally Posted by baileyscream do you follow what i meen?

so, where are my pics.

[3absiso]

Originally Posted by baileyscream oh! if you find anything wrong with a dump just flag it as invalid. dumps can be made all day but if a section that is not encripted is not valid then you can be sure a section that is encripted will also be not valid (you just cannot read it to tell) also it is a sign that a clip or wires are faulty so flashing back can / will flash correct data in the wrong areas or wrong data in correct areas. do you follow what i meen? but regardless now. it was flashed back before he recived a report. @x7desu follow what i have posted above. dont flash it anymore just dump. we need to get a better dump if possible

Thanx Baily i follow what you mean
lesson learned,
************* [ - Post Merged - ] *************

Originally Posted by Mr.Dutch so, where are my pics.

What are you doing Here,
long time no see my friend.
but i am collecting all Pics you put here

[x7desu]

then Try to flash your original Dump Via Fun Flash, then flash it back via (all switches down), and look what happens. if still nothing.

This causes short YLoD and system switches off with 3 beeps, red light is blinking.

patch your dump via Rogero and flash it with all switches down.

When I flash patched or original dump under Flash Fun mode (one wire soldered), system starts power on. But after flashing anything with all switches down there is YLoD again.

do a new dump as it is now. rename it test 1.bin you need to re-seat the clip then do a dump compare it to test 1 your looking for a dump that is different from that test 1 dump.

They are same (fc /b). Why they must be different? If clip is ok, they must be same, no?
But new dump (test1.bin) is different from original.