[haz367]

i thought with the above one u had a good saterday fix already..get it

[baileyscream]

Originally Posted by x7desu This causes short YLoD and system switches off with 3 beeps, red light is blinking. When I flash patched or original dump under Flash Fun mode (one wire soldered), system starts power on. But after flashing anything with all switches down there is YLoD again. They are same (fc /b). Why they must be different? If clip is ok, they must be same, no? But new dump (test1.bin) is different from original.

your test 1 should be different from your origional as its now patched.
you are now trying to get a different dump from test 1 as it has a corrupt area on it.
probably due to the clip not being on correct.
so if you can get a fifferent dump then we can see if the corrupt area is valid and go from there.

also i said stop flashing the ps3
everytime you do it is making it worse.
so either listen to me or ignore me. its your choice
but if your ignoring me then i'm out.

[x7desu]

@baileyscream
Ok, sorry. I'm just little nervous.
So, I was able to dump different data after deforming clip a little. What need I do now? Can I upload both dumps for you to check?

[baileyscream]

Originally Posted by x7desu @baileyscream Ok, sorry. I'm just little nervous. So, I was able to dump different data after deforming clip a little. What need I do now? Can I upload both dumps for you to check?

check they will extract in flow rebuilder without error
if they do then yes p/m me the dumps
include the origional and the test 1 dumps aswell.

i will go through them as soon as i can.

[x7desu]

@baileyscream
Second dump extracts without errors. I send you PM with both dumps.
Thanks.
************* [ - Post Merged - ] *************
@baileyscream
Sorry, but do not verify the dumps now: dumping by clip is extremely unstable, now every time new dump.
I'll buy solder and try to dump by test points.

[x7desu]

Up.
I think, solder will be delivered tomorrow.

Can someone upload DYN-001 soldering diagram for E3 Linker? Thanks.

[playerkp420]

Originally Posted by x7desu Up. I think, solder will be delivered tomorrow. Can someone upload DYN-001 soldering diagram for E3 Linker? Thanks.

Your mobo is here. It is labeled for Progskeet. So use this chart to know what is what, for e3 linker.

_________________________________________________________________

Originally Posted by Mr.Dutch nah, i was just hoping it was a 25xx model, i need some pics...lol.... you get it. ooh damnit,why me...lol

Sorry for the off topic, but had to give my boy a fix. LOL. Sorry if quality isn't all that, I took them with my phone.

CLICK ME FOR FIX

[x7desu]

@playerkp420
Thanks! Now flasher works fine, I hope.

Dear @baileyscream , I send you the original dump and dump from bricked console.
But yes, I'am probably retarded — I lost the incorrect test1.bin T__T
Look please if you can do something.

[baileyscream]

Originally Posted by x7desu Up. I think, solder will be delivered tomorrow. Can someone upload DYN-001 soldering diagram for E3 Linker? Thanks.

i spent ages doing the linker to test points.
there in my guide
btw
@playerkp420 if you want them for yours then feel free to copy them.

Soldering the E3 Flasher

DIA-001 BOARD



VER-001 BOARD



JSD-001 & SUR-001



DYN-001

[playerkp420]

Originally Posted by baileyscream i spent ages doing the linker to test points. there in my guide btw @playerkp420 if you want them for yours then feel free to copy them. Soldering the E3 Flasher DIA-001 BOARD VER-001 BOARD JSD-001 & SUR-001 DYN-001

I forgot you had those in there. Cool beans.