[bfka]

Originally Posted by Tr1ckst3r Ahhhhh oK thanks. All I have to do now is get one! Thanks for your help. Also could you provide a mirror for the nandway? It is no longer on github.

github.com/Effleurage/NORway-and-NANDway

[raiden@consoleopen]

Any help from judges about my zif socket configuration ?

[guerrierodipace]

@judges

I tried (like raiden @Console open) NORway with NOR in zif socket.
You suggest me on irc to coonect BYTE# and WP# to vcc but still same result.
No chip identification, so we can dump but not write.
Any suggestion?
thanks






NAND dump is ok



I haven't tried to write until now with this new hardware

[judges]

Originally Posted by raiden[MENTION=215751 Consoleopen;533993]There was something odd reading this thread, everyone has tristate High (or True) on norway.py output,

That was a bug in older versions. Tristate has to be pulled low.

Originally Posted by raiden[MENTION=215751 Consoleopen;542062]Any help from judges about my zif socket configuration ?

Sry, missed that one.. Currently have no idea what might be the problem.

-- judges
************* [ - Post Merged - ] *************

Originally Posted by guerrierodipace You suggest me on irc to coonect BYTE# and WP# to vcc but still same result. No chip identification, so we can dump but not write. Any suggestion?

Sry, currently out of ideas..

-- judges

[guerrierodipace]

Originally Posted by judges That was a bug in older versions. Tristate has to be pulled low. Sry, missed that one.. Currently have no idea what might be the problem. -- judges ************* [ - Post Merged - ] ************* Sry, currently out of ideas.. -- judges

Let us know if we can do any further investigation to solve this problem with NOR desoldered.
Thanks for your work

[raiden@consoleopen]

Mmmh, i'll try to switch tristate to ground

UPDATE

Judges, thank you ^_^

spansion is working now, i presume all NORs will work now.

Things to do for zif socket correct writing:
100nF capacitor between GND and 3.3 volt, simple and plain :P

progsh1t is gonna to the trash can

[judges]

Originally Posted by raiden[MENTION=215751 Consoleopen;542383]spansion is working now, i presume all NORs will work now.

Congrats! Nice!

[bfka]

Originally Posted by raiden[MENTION=215751 Consoleopen;542383] Things to do for zif socket correct writing: 100nF capacitor between GND and 3.3 volt, simple and plain :P

Capacitator between GND and 3.3 volt it is a must, as close as posible to pins itself. And this is true when working with all kind of flash IC.

[raiden@consoleopen]

Originally Posted by bfka Capacitator between GND and 3.3 volt it is a must, as close as posible to pins itself. And this is true when working with all kind of flash IC.

i'm aware now :P

[guerrierodipace]

Originally Posted by bfka Capacitator between GND and 3.3 volt it is a must, as close as posible to pins itself. And this is true when working with all kind of flash IC.

thanks
There's a typical range?