[euss]

Progskeet is shipped without bitstream

It is not shipped entirely blank, as configuration flags are set, so it will identify itself once connected to Injected and updated using the correct encrypted bitstreams.

Swapping the Actel 125 for a 250 would be useless, as you do not have the precompiled encrypted bitstream that was never released by uf6667


Ofcourse you would not have all these problems when using Teensy 2.0 ++ and NORway/NANDway.

[M8nTrap]

UF... who is this guys!? rip

[Abkarino]

Originally Posted by M8nTrap UF... who is this guys!? rip

Uf6667 is the man behind the ProgSkeet project.
He is the main hardware/firmware/software guy and he is so lazy

[M8nTrap]

Originally Posted by Abkarino Uf6667 is the man behind the ProgSkeet project. He is the main hardware/firmware/software guy and he is so lazy

thank you! can now also added that it is sodomized by a Chinese electronics retailer ... and he sells crap that does not work! that he is a liar ...

or maybe he is so smart that he made a very big mistake alone?
les muscles des bras ne sont pas ceux du cerveau...

[underwurlde]

I suppose the only route therefore for any resurrection of the ProgSkeet v1.1 PCB I come up with is for someone that has purchased a ProgSkeet v1.2 to then take the FPGA off of that and put it onto the v1.1 PCB. This works as this is what I have done and can now fully access (dump & program) NAND and NOR flash memory.

I wonder if this is something that people would want?

Andy

[M8nTrap]

the net stores still sell this **** ps1.2
they buy many devices to a liar group
they lie like progskeet and say that it works on NOR and NAND
no web shop has made ​​a correction about that ...

UF0000 lied to sell defective equipment and recovered the money invested, and it makes a profit with **** ...stay in the shadow uf de merde!
************* [ - Post Merged - ] *************
I invite you to criticize this guy!
himself never came onto any forum board !! speak about the problem of defective devices...

many months of silence helps earn money and passed his stock of ****ty 1.2! progskeet is manifest robbery!

[Abkarino]

Originally Posted by underwurlde I suppose the only route therefore for any resurrection of the ProgSkeet v1.1 PCB I come up with is for someone that has purchased a ProgSkeet v1.2 to then take the FPGA off of that and put it onto the v1.1 PCB. This works as this is what I have done and can now fully access (dump & program) NAND and NOR flash memory. I wonder if this is something that people would want? Andy

I had done this also since my old ProgSkeet 1.1 FPGA was bad, so i used the FPGA from another 1.2 ProgSkeet by desoldering it then replaced the defective one from ProgSkeet 1.1 by the working FPGA from my ProgSkeet 1.2 then just programmed it with 1.1 bitstream and it worked like a charm

[underwurlde]

Originally Posted by Abkarino I had done this also since my old ProgSkeet 1.1 FPGA was bad, so i used the FPGA from another 1.2 ProgSkeet by desoldering it then replaced the defective one from ProgSkeet 1.1 by the working FPGA from my ProgSkeet 1.2 then just programmed it with 1.1 bitstream and it worked like a charm

This is exactly the solution I am offering but with a new improved version of the original v1.1 PCB. I was therefore wondering if this would be useful to others who have purchased a v1.2?

Andy

[Abkarino]

Originally Posted by underwurlde This is exactly the solution I am offering but with a new improved version of the original v1.1 PCB. I was therefore wondering if this would be useful to others who have purchased a v1.2? Andy

Sure this will be handy for every one with non working ProgSkeet 1.2.
Also i had reversed some of ProgSkeet protocol to write my own application since WinSkeet still missing some useful functions and need to be improved also.

[rastaman46]

Originally Posted by underwurlde I suppose the only route therefore for any resurrection of the ProgSkeet v1.1 PCB I come up with is for someone that has purchased a ProgSkeet v1.2 to then take the FPGA off of that and put it onto the v1.1 PCB. This works as this is what I have done and can now fully access (dump & program) NAND and NOR flash memory. I wonder if this is something that people would want? Andy

Im would and bet u 1000 others will