[baileyscream]

Originally Posted by ElectroCommission Rad, I'll be looking forward to that then. Shame you're on the other side of the planet, I'd be happy to volunteer mine

no
when i try out new flashers i never do them on customers consoles
i buy them. usually with broken drives if i can find them so there cheeper.
this way if i mess up then its just my console and i take the cost.

[-={Nexus}=-]

Thanks for the help man! Will let you know after the weekend when i give it another go.

Cheers!

[baileyscream]

Originally Posted by -={Nexus}=- Thanks for the help man! Will let you know after the weekend when i give it another go. Cheers!

ok
take your time with it and we should get you back up and running

[ElectroCommission]

Originally Posted by baileyscream no when i try out new flashers i never do them on customers consoles i buy them. usually with broken drives if i can find them so there cheeper. this way if i mess up then its just my console and i take the cost.

Right on man, thats cool of you, tbh I'm probably more likely to jack up my system following a tutorial than you are experimenting with a mostly untested, brand new method on it, lol.

For reals though, thanks for the eventual tutorial and all the work you're doing for everyone.

[alirza]

[QUOTE=baileyscream;544094]i dont even know what it is that you dont know

do you know why i dont know what you dont know what i dont know?

do you know what i mean?


************* [ - Post Merged - ] *************


thanks my dear
I'm in the first steps, and the Nand memory does not appear I have also made ​​it clear in the past, what is the solution?

[jensen76]

Originally Posted by baileyscream you have it in fsm? then you havent done what i allways do by forgetting to put the hdd back in? not that i do it everytime

yes fsm is working and i have the hdd in my problem is that i cant get it to read the pup.the text files is comming on the usb but there is no text in it and yes its the right files and names.. it only happens on the ps3 whit bad blocks.every ps3 whit bad blocks has 2 different firmwares in ros_0 and ros_1 i dont know if that is normal and the bad block is always the bottom nand and all ps3 are CECHG04 semi 001 whit samsung ECF1009540 chips

[baileyscream]

Originally Posted by alirza Originally Posted by baileyscream i dont even know what it is that you dont know do you know why i dont know what you dont know what i dont know? do you know what i mean? thanks my dear I'm in the first steps, and the Nand memory does not appear I have also made ​​it clear in the past, what is the solution?

the clip simply is not on correctly.
check it isnt hitting any components around the chip and that any adjustment of the clip (file / scraped the clip to fit) has not effected any of the little legs inside the clip
************* [ - Post Merged - ] *************

Originally Posted by jensen76 yes fsm is working and i have the hdd in my problem is that i cant get it to read the pup.the text files is comming on the usb but there is no text in it and yes its the right files and names.. it only happens on the ps3 whit bad blocks.every ps3 whit bad blocks has 2 different firmwares in ros_0 and ros_1 i dont know if that is normal and the bad block is always the bottom nand and all ps3 are CECHG04 semi 001 whit samsung ECF1009540 chips

if your ps3 is booting to the "connect controller screen" before you enter fsm then it may be that the usb stick needs a full format then put the fsm files back on and see if that helps.

[alirza]

baileyscream
Thank you very much for your answer.
But I have another question, please? Can I work the (progskeet v1.2) by (USB) with connecting all the required components?

[psxpetey]

apparently teensy++ 2.0 can do nands now?

[gazcbm]

Hey

Ive been following Baileys guide right up to the point where I am trying to enter FSM mode (dump valid, e3_downgrade run etc) but no matter how fast I press power and eject after each other I get the "Connect the controller..." screen.

Now.. When I placed my order for e3 flasher and usb dongle I had originally order the PSBreak however just before the supplier shipped they contacted me to tell me they have had to supply the PS3Kit instead.

Firstly I realise that the PS3kit is not listed in Baileys guide but I have a few questions.

1) I am not sure if this is the dongle or perhaps things havent quite worked how they should have. Is there any point pressing the PS Button as the screen suggest and taking a look on the XMB to see what the firmware is reporting or would this brick the PS3

2) If it is the PS3kit at fault, could I reconnect the E3 and try flashing from the point of chapter 2 method 1 in playerkp420s guide ?

Any help I can get will be mucho appreciated :-) Cheers guys