[urbananonymous]

OK so i've been downgrading ps3's for a while now and every time i do a downgrade with my e3 flasher i have to go thru 3 different fw's to get to the one i want on the system i am doing. so my question is, when putting the ps3updat.pup file on the usb stick with the lv2diag during service mode, am i able to just replace the ps3updat.pup file with lets say rogero 4.30 or a 3.55 ofw pup? or does the update file have to be a modified one? cause as of now the pup that is in the folder with the lv2 is rogero 4.21 spoofed to 4.11 i think. its would save me alot of time....

[Josh_oc3]

You would sacrifice time over safety? All for saving 20 minutes.

[Turtle3000]

yeah um dont downgrade to 4.30 downgrade to 3.55 kmauw w/o lvl2 checks then qa flag and upgrade to rogero 4.30

[carldenning]

Originally Posted by Turtle3000 yeah um dont downgrade to 4.30 downgrade to 3.55 kmauw w/o lvl2 checks then qa flag and upgrade to rogero 4.30

nice info if u want to make the op brick his !!

you cant downgrade to 3.55 kmeaw as u would brick , it would have to be rogero 3.55 .


@op there is way to downgrade straight to rogero 4.30 , i'm not sure how as i've never done it but i've seen it some where on this site

[playerkp420]

You can go Straight to Rogero. METHOD 2 in Chapter 2 of my guide below.

[haz367]

its a bit pointless cuse one needs to dehash anyway, either with the "usual" ROGERO 3.7 nochecker or ..yes ...there excist a KMEAW no checker pup! so when using this patched KMEAW think its from the spanish..dospiedra...

think thats what @Turtle3000 means here....

so either one wil work to downgrade, not the default KMEAW, that one wil brick ur console while trying to install on initial downgrade

u can't skip..do it properly..downgrade to 3.55 using Rogero's 3.7 and dehash. then trow whatever u want at it

[urbananonymous]

Originally Posted by Josh_oc3 You would sacrifice time over safety? All for saving 20 minutes.

if thats the case then absolutly not, but how would i change the fw thats loaded onto it when in factory mode?

[DHawk216]

**** yea it went down like that. People act like **** like that DONT happen. Psh.

[playerkp420]

Originally Posted by urbananonymous if thats the case then absolutly not, but how would i change the fw thats loaded onto it when in factory mode?

METHOD 1 in Chapter 2 of my guide below, is probably the fastest and safest route. Since you still dehash.

With that method you do not need a FSM dongle and you don't format the HDD.