[clayr08]

i found the cfw info and download links...

thanks for all the help

Originally Posted by halil_kaya i.e. most commonly your PS3 starts in green light for a few seconds and then switch off automatically e3 flasher downgre problem help

if you start a thread you will get help

most of the time you are not supose to ask off topic questions in the middle of another persons thread although they have helped me and i dont have anymore question so i dont care

but still you will have better luck starting your own thread here... http://www.ps3hax.net/newthread.php?do=newthread&f=10

[3absiso]

Originally Posted by clayr08 i found the cfw info and download links... thanks for all the help if you start a thread you will get help most of the time you are not supose to ask off topic questions in the middle of another persons thread although they have helped me and i dont have anymore question so i dont care but still you will have better luck starting your own thread here... http://www.ps3hax.net/newthread.php?do=newthread&f=10

Like @haz367 said
do not forget to QA falg your PS3

[clayr08]

i keep trying to run toggle_qa.pkg

im on rodgero v3.7

my ps3 system settings say im on 4.25

toggle_qa.pkg never reboots my ps3 just hangs

im not sure if you were trying to tell me to install one of these pups

if i need to do that than which one do i use ?

and do i instal pup from recover menu or from XMB ?

REBUG_4.21.1_REX_PS3UPDAT.PUP
REBUG_4.21.1_REX_PS3UPDAT.PUP
REBUG_4.21.1_REX_PS3UPDAT.PUP
REBUG_3.55.3_REX_PS3UPDAT.PUP
REBUG_3.55.3_REX_PS3UPDAT.PUP
REBUG_3.55.3_999_DGR_PS3UPDAT.PUP
REBUG_3.55.3_999_DGR_PS3UPDAT.PUP
REBUG_3.55.3_999_DGR_PS3UPDAT.PUP

[3absiso]

Keep trying for the QA, if it hangs always
run the reset QA first then run Flag QA
if the Dehash did not work for you install Rogero CFW 4.30 V2.05 it does not require De hash,
but always good to dehash and you are on CFW 3.55 now with a spoof of 4.25

[clayr08]

Originally Posted by 3absiso Keep trying for the QA, if it hangs always run the reset QA first then run Flag QA if the Dehash did not work for you install Rogero CFW 4.30 V2.05 it does not require De hash, but always good to dehash and you are on CFW 3.55 now with a spoof of 4.25

i tried it several more times but always hung up

i decided to try to go to recovery menu and load ofw 3.55 after i push start and select the screen where it says checking please wait i let it sit on that screen for 20 minutes and it just stayed like that so i rebooted and had to use e3 flasher to jailbreak again

back on rodgero v3.7 3.55 cfw with 4.25 spoof and tried to go to recover menu and instal Rogero CFW 4.30 V2.05 but its getting hung up on the checking please wait screen for 20 minutes now

now i guess im just gonna try to install Rogero CFW 4.30 V2.05 from XBM

and what is run the reset QA first then run Flag QA

what is run the reset QA, i could not find information about reset QA anywhere

[3absiso]

there i two pgks one QA flag and other Reset QA Flag
can you install multiman on Rogero V3.7?
try any package and try to run it and see if you can.
if you can not, it means youe DVD Drive not connected properly or needs remarry

[clayr08]

my dvd drive has always been disconected

you think things would be working better for me if i connected it?

and i cant find the reset qa pkg i have looked everywhere

[3absiso]

Originally Posted by clayr08 my dvd drive has always been disconected you think things would be working better for me if i connected it? and i cant find the reset qa pkg i have looked everywhere

It has to be connected

[clayr08]

i connected it, and 1st time i used QA flag it beeped and rebooted

now im gonna go to recover menu and install Rogero CFW 4.30 V2.05

[3absiso]

Originally Posted by clayr08 i connected it, and 1st time i used QA flag it beeped and rebooted now im gonna go to recover menu and install Rogero CFW 4.30 V2.05

Just make sure it is activated right. and you install OFW 3.55 first to dehash

to make sure it is activated
go to Network Settings
and press L1+L2+L3 R1+R2 dpad together
you will find three more options appears below network settings

This QA Tut