[elsa7er]

hi guys
i soldring a e3 linker and tern on ps3 Without hdd and tern of ps3 from switch Then connect hdd and tern on ps3 Works for a second and turn off There is no red light

[Mr.Dutch]

@elsa7er , what is your model number, and do you not have a short on a solder point?

[elsa7er]

this my board
http://pocketnews.cocolog-nifty.com/.../100729_09.jpg
and i dont have any short on baord

[donkey-punch]

Originally Posted by elsa7er this my board http://pocketnews.cocolog-nifty.com/.../100729_09.jpg and i dont have any short on baord

Couldn't you post a close up pic of your soldering?

[Mr.Dutch]

Originally Posted by elsa7er and i dont have any short on baord

did you allready tried to solder tristate to ground to see if it stay on?.

if it still shut down then you might have a broken fuse.

[elsa7er]

no broken any fuses

[Mr.Dutch]

Originally Posted by elsa7er no broken any fuses

then solder tristate to ground?

[playerkp420]

If he soldered the linker, he should have sbe to tristate.

Try and turn the PS3 on with the first switch up.

[elsa7er]

Originally Posted by playerkp420 If he soldered the linker, he should have sbe to tristate. Try and turn the PS3 on with the first switch up.

i try this and some problem

[Mr.Dutch]

Originally Posted by elsa7er i try this and some problem

and you correctly soldered all the wires to the points?

if i'm correct then you can turn on the ps3, but it will shut down in about 2-3 seconds.