[baileyscream]

Originally Posted by Abkarino I had checked my power supply again and it said Orange 3.3V -- 28A, so i'm sure that it will gives PS3 board enough current, but maybe some thing wrong. So i'll try to test it later then feedback.

with the pc psu you need a dummy load on the line to stop the current dropping when no power is being drawn from the psu.
if it drops then it wont pick up the power again.
http://www.ps3devwiki.com/wiki/Talk:...h_external_PSU

[martussx]

Here are some updates but no result
I made myself a 2xD battery holder, i connected dhe 3.3v to e3 and the gnd to e3 from e3 i put the wire to the tristate of ps3 also the clip from e3 to ps3 nor, turned on the e3 flasher, e3 flasher ready switch 1 and 2 down 3 up 4,5 and 6 down the pushed the start button on e3 to dump the nor and after a few sec error 10001100 (error initializing ps3 bios). Any help? What i am doing wrong?

Sent from my MB865 using Tapatalk 2

[BwE]

Using 0.5A and or 1A can yield a corrupted read of the NOR from a slim but it will not read anything on a fat.

This is where I stopped working on it until I got more supplies.

[martussx]

So you are saying that a self powered e3 flasher cannot be done?
By the way may ps3 is a slim and wen i power it on assembled it gives me green light for 1-3 sec and then off noo beeps no lights at all. I have to push the power button again to get the red standby light on than a again to power it on then a green light the of noo beeps no light. Because of this problem i want to make a self powered e3 flasher so we can dump died consoles...

Sent from my MB865 using Tapatalk 2

[BwE]

Originally Posted by martussx So you are saying that a self powered e3 flasher cannot be done? Sent from my MB865 using Tapatalk 2

Are you saying you did not read a word I have written?

[martussx]

Sorry buddy i did not understand ed your answer. By the way god work

Sent from my MB865 using Tapatalk 2

[martussx]

Did anybody tested the selfpowered e3 to get a valid dump?

Sent from my MB865 using Tapatalk 2

[danguy2009]

Very good, I may try this one day.

[BwE]

Originally Posted by danguy2009 Very good, I may try this one day.

Try it now.

[danguy2009]

Haha, but its 3am here. I would make too much noise in my room rummaging around to gather all the parts I need to do it