[LilTunechi25]

i unbricked my ps3 last night, but when i leave
my ps3 unplugged 4 a few hours then i turn it on its seems like GLOD but the usb's work
any i noticed that the HDD blinks 4 abit then after its doesn't any more then i can't turn it off
unless i hold it or uplug it and i already rebuild data still does the same thing any i have 2 put my ps3
in factory service with the dongle then i have to re-install rogero v3.7 3.55? wonder why i does this???
it also freezes on the xmb or when i start it up?

[playerkp420]

Originally Posted by LilTunechi25 i unbricked my ps3 last night, but when i leave my ps3 unplugged 4 a few hours then i turn it on its seems like GLOD but the usb's work any i noticed that the HDD blinks 4 abit then after its doesn't any more then i can't turn it off unless i hold it or uplug it and i already rebuild data still does the same thing any i have 2 put my ps3 in factory service with the dongle then i have to re-install rogero v3.7 3.55? wonder why i does this??? it also freezes on the xmb or when i start it up?

Have you dehashed?

Try and toggle qa flag on. Then install OFW 3.55 with Condor updater, twice.

Then install any CFW.

If that doesn't work, freezing on the XMB is a sign of the HDD going bad.

[BwE]

Problem: NOR pins are damaged (If clipped the E3 the wrong way or multiple times) - otherwise it could be the HD, would need more details.

[LilTunechi25]

Originally Posted by BwE Problem: NOR pins are damaged (If clipped the E3 the wrong way or multiple times) - otherwise it could be the HD, would need more details.

nope the pin are fine i found the problem i need a new heatsink 1 hole is striped
or can i use a bigger screw?
************* [ - Post Merged - ] *************
FIXED IT!! i used a bigger screw and another clamp what holds the heatsink!!!
idk how long the fix will last though?

[BwE]

Originally Posted by LilTunechi25 nope the pin are fine i found the problem i need a new heatsink 1 hole is striped or can i use a bigger screw? ************* [ - Post Merged - ] ************* FIXED IT!! i used a bigger screw and another clamp what holds the heatsink!!! idk how long the fix will last though?

the ps3 wont have the glod from heat.

[LilTunechi25]

Originally Posted by BwE the ps3 wont have the glod from heat.

the rsx wasn't keepin contact but now i tryed to update to 3.40ofw now my ps3 is bricked again ? i tryed 2 unbrick the SBE is soldered good but the ps3 wont stay on

[BwE]

read what i said before.

[katsuru]

Originally Posted by LilTunechi25 the rsx wasn't keepin contact but now i tryed to update to 3.40ofw now my ps3 is bricked again ? i tryed 2 unbrick the SBE is soldered good but the ps3 wont stay on

did you start the console with flashfun mode enabled ?

[LilTunechi25]

Originally Posted by katsuru did you start the console with flashfun mode enabled ?

yes i did start 100000 but it wont stay on and the pins are fine!!

[katsuru]

sounds pretty much like hardware problem to me.