[THE-CRACKER]

Originally Posted by MJ999 YOUR DUMP IS VALID

thank you soooo much

[MJ999]

Originally Posted by snoop123 hi there everyone i have send the mail to dumpcheck @ hotmail .co.uk. And a big thanks.

YOUR DUMP IS VALID

[Time007]

Hey guys, ive sent my email but i dont think u guyz receive it, can u check on it please ?

Thx so much in advance ^^

[MJ999]

Originally Posted by Time007 Hey guys, ive sent my email but i dont think u guyz receive it, can u check on it please ? Thx so much in advance ^^

We got your email, But I am not an expert on NAND dump checking.

@3absiso or @Sarah1331

[Time007]

Hum i have a slim CECH 2104 A, its a nor one, correct me if im wrong.

[3absiso]

Originally Posted by bfka I've sent my CECHG dump, just forgot to mention it here...

I Have to Say Not valid,
But
Bootldr 1 is Fine , Bootldr 0 is not.
also Ros1 is not ok.
how you end up having this dump
I was able to reproduce Bootldr 0 from the Bootldr1 but nor Ros1

[sAmZoTt]

Good day. I just emailed my downgraded dump from 4.25ofw to 3.55ofw. Just want to make sure everything is ok with the dump. Not sure if you guys can tell if the QA if flagged just from a dump....i'm not even sure if that sentence made sense but just want to make sure it ok to upgrade to the latest CFW. Many thanks Team.

[3absiso]

Originally Posted by sAmZoTt Good day. I just emailed my downgraded dump from 4.25ofw to 3.55ofw. Just want to make sure everything is ok with the dump. Not sure if you guys can tell if the QA if flagged just from a dump....i'm not even sure if that sentence made sense but just want to make sure it ok to upgrade to the latest CFW. Many thanks Team.

ROS1 is not Valid, you WERE or ARE on CFW 3.55?
everything else looks Fine.
IF Yes, Your Dump is Valid

[sAmZoTt]

Originally Posted by 3absiso ROS1 is not Valid, you WERE or ARE on CFW 3.55? everything else looks Fine. IF Yes, Your Dump is Valid

Thanks for checking. I downgraded to 3.55cfw rogero 4.11 I believe, then I followed the QA flag steps to get to 3.55ofw. According to the baileyscream guide I should be on 3.55ofw. Now I just want to make sure I can upgrade to the latest CFW. Thanks.

[bfka]

Originally Posted by 3absiso I Have to Say Not valid, But Bootldr 1 is Fine , Bootldr 0 is not. also Ros1 is not ok. how you end up having this dump I was able to reproduce Bootldr 0 from the Bootldr1 but nor Ros1

The dump is made using teensy 2.0 ++ with NANDway (desolder the nands) on working ps3 OFW 4.11. For the dump itself it's 100% good, because with COK-002 (used for spares in this scenario, because I know there will be problems with CECHG) nands everything is OK. So far what I did: 1. Original SEM-001 nands is intact (in plastic bag I mean); 2. Use flowrebuilder to interleave without any errors; 3 Replace bootloader_0 with bootloader_1 in the unified dump; 4. Patch the dump; 5. RE-SCRAMBLE a modified dump then de-interleave it into two new empty donor nands (thanks goes for ps3devwiki); 6. Solder the nands upside down; 7. . Completely lost my mind after doing that stupidity

So...I have a question. I've see that ros1 is bad(folder name is goofy, for the files inside I did not know). Doesn’t the patch itself replace the rosX folders with patched ones, or just modify the existing ones? When flowrebuilder apply the patch, I can clearly see ros0&1 folders (3.55 ones), so that leads my mind to continue the downgrade process with this dumps.

p.s. sorry for the bad language skills

Thank you!