[3absiso]

Originally Posted by bfka The dump is made using teensy 2.0 ++ with NANDway (desolder the nands) on working ps3 OFW 4.11. For the dump itself it's 100% good, because with COK-002 (used for spares in this scenario, because I know there will be problems with CECHG) nands everything is OK. So far what I did: 1. Original SEM-001 nands is intact (in plastic bag I mean); 2. Use flowrebuilder to interleave without any errors; 3 Replace bootloader_0 with bootloader_1 in the unified dump; 4. Patch the dump; 5. RE-SCRAMBLE a modified dump then de-interleave it into two new empty donor nands (thanks goes for ps3devwiki); 6. Solder the nands upside down; 7. . Completely lost my mind after doing that stupidity So...I have a question. I've see that ros1 is bad(folder name is goofy, for the files inside I did not know). Doesn’t the patch itself replace the rosX folders with patched ones, or just modify the existing ones? When flowrebuilder apply the patch, I can clearly see ros0&1 folders (3.55 ones), so that leads my mind to continue the downgrade process with this dumps. p.s. sorry for the bad language skills Thank you!

Most of what you said tried to understand. But not everything.
And yes the patch fixes the Ros,
My
Teensy on the way though.
Also you have two bad blocks

[WalangAlam]

Kindly check my dumps please Im getting TRVK_PRG1: [DANGER] - 323131E688B10EF11F9E4CD5DE76DEE6 everything else is green
I resoldered my teensy++ already but I'm still getting same TRVK_PRG1: [DANGER] - 323131E688B10EF11F9E4CD5DE76DEE6

[3absiso]

Originally Posted by Time007 Hey guys, ive sent my email but i dont think u guyz receive it, can u check on it please ? Thx so much in advance ^^

Your Dump is Valid

[MJ999]

Originally Posted by WalangAlam Kindly check my dumps please Im getting TRVK_PRG1: [DANGER] - 323131E688B10EF11F9E4CD5DE76DEE6 everything else is green I resoldered my teensy++ already but I'm still getting same TRVK_PRG1: [DANGER] - 323131E688B10EF11F9E4CD5DE76DEE6

YOUR DUMP LOOKS VALID

trvk_prg shows invalid in norpatch, but yesterday I got this same problem with a console, I flashed the patched dump and it worked

[WalangAlam]

Originally Posted by MJ999 YOUR DUMP LOOKS VALID trvk_prg shows invalid in norpatch, but yesterday I got this same problem with a console, I flashed the patched dump and it worked

Ya looks valid indeed. I just have HUGE hesitation because of Danger

[Time007]

Thx guys to do what ur doing ^^, lets downgrade then xD

[BwE]

Originally Posted by WalangAlam Ya looks valid indeed. I just have HUGE hesitation because of Danger

*cough* patch it

Also send me the dump and ill investigate if its just due to it being unknown.

[WalangAlam]

Originally Posted by BwE *cough* patch it Also send me the dump and ill investigate if its just due to it being unknown.

patched and flashed and working...
thanks everyone.
dump forwarded to BwE for analysis.

[arcadekidflo]

Email sent , please help me out guys , dump seemed fine but console bricked
BWE Validator gave a warning about 00's but i read here that it's ok if you're on 4.31

18.24%[WARNING] - Patch & Recheck (Unsafe below 18.24)

[arcadekidflo]

Anyone got the chance to look at my backup ? Should i have sent it attached to the email or uploaded somewhere ?