[hexial]

ok, first things first

prior the condition patient was treated with e3 flasher and i, in my own anxious mindset, instead of e3 card reader acting as a downgrade dog, put true blue dongle thinking it's a downgrade dongle, which it isn't, into the patient, when that didn't work i plugged in the joystick in an attempt to do whatever. when i received the e3 card reader, i downgraded the patient with e3 card reader and then tried to exit fsm, after the install of rogero 3.55 cfw which completed 100% but i never saw it, it just returned back to fsm and in e3 flasher log stated that it failed to initialize ps3 bios and e3_downgrade was still on micrto sd card. i then tried to update to 4.31 ofw and got corrupt data error 8002f157, which i tried to fix but couldn't manage to put that downgrade.bin into the patient, i got fail to initialize e3 nor error 10001100. afterwards i tried to downgrade again making 3 non valid dumps. i reclipped like 50-70 times i got so frustrated that i took out the clamp and after that i received ylod which i thougt was a bricked patient and tried to solder tristate to e3 sbe then tristate to ground on mobo, which didn't help at all. then i noticed it's only a ylod, i reflowed it for a brief moment, then decided to reflow again but this time connect e3 flasher and solder tristate to ground on mobo. i reflowed with an industrial fan but my flux is a no no-clean flux and it melted and went all over the board. i tried to remove it with alcohol but all i managed to do is smear the flux all over the board. i put it back and sow dim led light on my patient as soon i turned the power to 1 (NO patient PWR ON), so i concluded flux went into the pores of my mobo and it is eating it's way around from the inside of my patient.

with this i conclude my report in an effort to warn everybody what not to do when downgrading with e3 flasher

also, tomorow i'll try to remove the flux with hot water. anybody have a better idea?

second:

ps3 is 2-3 year old, it is used and i bought it from the add saying it was dual boot cfw, which it wasn't. both hdd disks were empty, fresly formated, no multiman or any other cfw, in setting saying it is 4.11 ofw. i also got Metldr2 error in my e3 flasher log saying patient is undongradeable. ???

i can take pictures and video and upload it here, so you can see 3x Y light

[playerkp420]

Originally Posted by hexial ok, first things first prior the condition patient was treated with e3 flasher and i, in my own anxious mindset, instead of e3 card reader acting as a downgrade dog, put true blue dongle thinking it's a downgrade dongle, which it isn't, into the patient, when that didn't work i plugged in the joystick in an attempt to do whatever. when i received the e3 card reader, i downgraded the patient with e3 card reader and then tried to exit fsm, after the install of rogero 3.55 cfw which completed 100% but i never saw it, it just returned back to fsm and in e3 flasher log stated that it failed to initialize ps3 bios and e3_downgrade was still on micrto sd card. i then tried to update to 4.31 ofw and got corrupt data error 8002f157, which i tried to fix but couldn't manage to put that downgrade.bin into the patient, i got fail to initialize e3 nor error 10001100. afterwards i tried to downgrade again making 3 non valid dumps. i reclipped like 50-70 times i got so frustrated that i took out the clamp and after that i received ylod which i thougt was a bricked patient and tried to solder tristate to e3 sbe then tristate to ground on mobo, which didn't help at all. then i noticed it's only a ylod, tried to reflow with an industrial fan but my flux is a no no-clean flux and it melted and went all over the board. i tried to remove it with alcohol but all i managed to do is smear the flux all over the board. i put it back and sow dim led light on my patient as soon i turned the power to 1 (NO patient PWR ON), so i concluded flux went into the pores of my mobo and it is eating it's way around from the inside of my patient. with this i conclude my report in an effort to warn everybody what not to do when downgrading with e3 flasher also, tomorow i'll try to remove the flux with hot water. anybody have a better idea?

Is this a joke? LOL.

I think its time to sell it for parts.

Please edit your post and use punctuation. And a better translator. What is a patient?

[hexial]

nope, unfortunately it's not a joke. patient is a ps3 console ofc. no need for mocking, my english is pretty damn good

[charlie666]

Reflow = Sh*te. In fact taking a dump on the mobo would significantly improve any chances of a reflow lasting over 6 months.

[BwE]

Originally Posted by hexial ok, first things first when i received the e3 card reader, i downgraded the patient with e3 card reader and then tried to exit fsm, after the install of rogero 3.55 cfw which completed 100% but i never saw it, it just returned back to fsm and in e3 flasher log stated that it failed to initialize ps3 bios and e3_downgrade was still on micrto sd card.

You did not read any guides did you...

Originally Posted by hexial i then tried to update to 4.31 ofw and got corrupt data error 8002f157, which i tried to fix but couldn't manage to put that downgrade.bin into the patient, i got fail to initialize e3 nor error 10001100.

Clip is probably damaged at this point

Originally Posted by hexial afterwards i tried to downgrade again making 3 non valid dumps.

And I am correct!

Originally Posted by hexial i reclipped like 50-70 times i got so frustrated that i took out the clamp and after that i received ylod which i thougt was a bricked patient and tried to solder tristate to e3 sbe then tristate to ground on mobo, which didn't help at all.

Because you have probably destroyed the NOR and clipping it 50-70 times just shows this. Note: The NOR can only handle being clipped 1-2 times without pressure and maybe 5 times with pressure.

Originally Posted by hexial then i noticed it's only a ylod, i reflowed it for a brief moment, then decided to reflow again but this time connect e3 flasher and solder tristate to ground on mobo. i reflowed with an industrial fan but my flux is a no no-clean flux and it melted and went all over the board. i tried to remove it with alcohol but all i managed to do is smear the flux all over the board.

Because you're too stupid to ask BEFORE doing something - now youre happy to ask - now its too late...

Originally Posted by hexial i put it back and sow dim led light on my patient as soon i turned the power to 1 (NO patient PWR ON), so i concluded flux went into the pores of my mobo and it is eating it's way around from the inside of my patient.

Your ps3 would have been fine if you simply read the ps3devwiki and downgraded it PROPERLY the first time.

Originally Posted by hexial with this i conclude my report in an effort to warn everybody what not to do when downgrading with e3 flasher also, tomorow i'll try to remove the flux with hot water. anybody have a better idea?

Yes, this is what happens when you dont follow instructions. removing it is done via isopropyl alcohol or 'flux remover'. but thats pointless as your ps3 died a long time ago.

Originally Posted by hexial second: ps3 is 2-3 year old, it is used and i bought it from the add saying it was dual boot cfw, which it wasn't. both hdd disks were empty, fresly formated, no multiman or any other cfw, in setting saying it is 4.11 ofw. i also got Metldr2 error in my e3 flasher log saying patient is undongradeable. ??? i can take pictures and video and upload it here, so you can see 3x Y light

[playerkp420]

Originally Posted by hexial nope, unfortunately it's not a joke. patient is a ps3 console ofc. no need for mocking, my english is pretty damn good

Nevermind. BwE summed it up. LOL.

[rastaman46]

Originally Posted by charlie666 Reflow = Sh*te. In fact taking a dump on the mobo would significantly improve any chances of a reflow lasting over 6 months.

Reflow is good if its done right!!!

[hexial]

thank you people for your support i hope this never happens to you or your children
************* [ - Post Merged - ] *************
where were you all knowing haters while i posted my threads before? it's easy to diagnose patients condition now, even i can do it

[HulkWogan]

Patient deceased, time for a cremation.

[hexial]

Originally Posted by HulkWogan Patient deceased, time for a cremation.

,) i'm into necrofilia these days. untill it dies for good or i fix it i'm not going to give up

it died for good