[saeeid_skhm]

hi
i have a 80 g fat ps3 that become very hot and noisy when i use hdmi
cpu temp go up to 82 c in mm menu(idle) and the fan runs at full speed after 7-8 minutes(gpu temp is 50-60 in idle)
but when i use av cable its very quiet and cool(max cpu temp=72 after running 20 min of u2)
is that means its going to be ylod or there is another problem?

[LilTunechi25]

Originally Posted by saeeid_skhm hi i have a 80 g fat ps3 that become very hot and noisy when i use hdmi cpu temp go up to 82 c in mm menu(idle) and the fan runs at full speed after 7-8 minutes(gpu temp is 50-60 in idle) but when i use av cable its very quiet and cool(max cpu temp=72 after running 20 min of u2) is that means its going to be ylod or there is another problem?

needs new thermal paste or reball

[saeeid_skhm]

Originally Posted by LilTunechi25 needs new thermal paste or reball

i applied new thermal paste(z5) about a week age but no use
before that i reflewed cpu(as gpu wasnt hot) nothing changed
do i need to reflew somewhere else?

[BwE]

Originally Posted by LilTunechi25 needs new thermal paste or reball

idiot...

if thermal paste does nothing it needs new thermal adhesive.

[3absiso]

Originally Posted by saeeid_skhm i applied new thermal paste(z5) about a week age but no use before that i reflewed cpu(as gpu wasnt hot) nothing changed do i need to reflew somewhere else?

As @BwE said,
you need to change the thermal and the adhesive beteween the CPU itself and the IHS (Metal cover over the CPU. and you need a pro to do it.

[BwE]

Generally its the adhesive under the CPU and not the RSX.

Many times have I changed just the RSX and its done NOTHING.

;(

[3absiso]

Originally Posted by BwE Generally its the adhesive under the CPU and not the RSX. Many times have I changed just the RSX and its done NOTHING. ;(

Thanx Bro,
what is the best way to remove the IHS, i am still afraid of doing this fix
By the way, i saw the movie yesterday of your Avatar, i have no clue what was going on, i was busy i could not concentrate on the movie.

[saeeid_skhm]

thanks a lot
i cut the adhesive with aceton and razor and used thermal paste insteed and the fan runs at lowest speed even in games