[johnscrub]

Well im gonna take the plunge and downgrade a slim ps3 with an e3 flasher i ordered today.I wont see it for a week or so but in meantime ill be reading and rereading your guide.Actually have been trolling for quite a while reading it on and off.Question is what are chances of a permabrick?lol

[Tommy1603]

Is it possible to use the Teensy++ 2.0 with a nand clip? I saw a post of Bailey in another thread where he first said it was possible but then said it might not work, does anyone know if and how? Thanks.

[Decoy]

@Tommy1603 I was going to discuss this with bailey , but for now I understood that this is possible , but I haven't Seen a tutorial yet , but I assume you just have to solder the points from the header of the clip to teensy as shown in ps3devwiki , I'll try this next week and let you guys know ,

One more thing, @baileyscream can you tell us if its possible and if you will make a tutorial of the NAND teensy?

[baileyscream]

Originally Posted by johnscrub Well im gonna take the plunge and downgrade a slim ps3 with an e3 flasher i ordered today.I wont see it for a week or so but in meantime ill be reading and rereading your guide.Actually have been trolling for quite a while reading it on and off.Question is what are chances of a permabrick?lol

get your dump verified then get a second opinion on it.

you need to be really sure you have a good dump before flashing anything back to the ps3.

but there is always a risk.
messing with a flasher with system files will never have a low risk of bricking.

but we are doing our best to minimise the risks (guides / verify tools / wiki ) they all need to be used
************* [ - Post Merged - ] *************

Originally Posted by Tommy1603 Is it possible to use the Teensy++ 2.0 with a nand clip? I saw a post of Bailey in another thread where he first said it was possible but then said it might not work, does anyone know if and how? Thanks.

i'm waiting on a working NAND console to do this.

everyone i have bought has turned up not working.

but i have had a call from a friend at CEX (comp exchange) to say he has a working one with a broken shell that i can have for the guide. so when i get it from him i will see what i can do.
************* [ - Post Merged - ] *************

Originally Posted by Decoy @Tommy1603 I was going to discuss this with bailey , but for now I understood that this is possible , but I haven't Seen a tutorial yet , but I assume you just have to solder the points from the header of the clip to teensy as shown in ps3devwiki , I'll try this next week and let you guys know , One more thing, @baileyscream can you tell us if its possible and if you will make a tutorial of the NAND teensy?

just get pin headders solderd to the TEENSY++ when you order one then buy some jumper leads to link them.

the prob i had was that i was thinking too much. the markings on the pin header board for the clips should just line up to the out puts on the TEENSY++.

but i will be doing it very soon

[techmology]

has anybody had any success with progskeet 1.2 to read NOR image ?

[Decoy]

Originally Posted by techmology has anybody had any success with progskeet 1.2 to read NOR image ?

Reading yes
Writing. No

Get a teensy and stop wasting your time, I wasted 60 days on 1.2 .. And it never worked .. and then I got this cheap amazing chip .. Teensy++

[johnscrub]

thanks bailey!!Im one of those that read and read again b4 i try anything.I get really mad when i mess something up just cause im to stupid to read or take somebody elses advice,so wish me luck and ill have my flasher friday...or so tracking says..lol wish me luck. bailey is there a place where i can ask somebody to check my dump?I clicked the link you have in the e3 flasher tutorial but it says its a bad link!!??

[bbh1400]

Tried to dump using 3 other computers and I'm still getting unknown 0x90. Tried using crackmydays method and the standard procedure just to be safe and still no game. Any help guys?
Thanks a ton.
I also just tried it with it hooked up to my tv, when running "norway.py comX" the ps3 does not freeze like is should...

[wtfareuthinking1]

I followed the guide to a "T". All went well, got to the screen where it asks you to plug in your controller. So I did plug in my controller and pressed X thinking it would let me reformat my HDD, but instead it told me I needed to upgrade to 4.30. So I turned the ps3 off and tryed it again, same thing, told me I needed to upgrade to 4.30. So I turned off my ps3 and went to bed to think on which CFW I wanted.
In the morning I started my ps3 (had my ps3break in hand) and it did this....
youtu.be/DFDwKFr95Zo




Side note, why was I banned as a spam bot??

[hellsing9]

Originally Posted by wtfareuthinking1 I followed the guide to a "T". All went well, got to the screen where it asks you to plug in your controller. So I did plug in my controller and pressed X thinking it would let me reformat my HDD, but instead it told me I needed to upgrade to 4.30. So I turned the ps3 off and tryed it again, same thing, told me I needed to upgrade to 4.30. So I turned off my ps3 and went to bed to think on which CFW I wanted. In the morning I started my ps3 (had my ps3break in hand) and it did this.... youtu.be/DFDwKFr95Zo Side note, why was I banned as a spam bot??

Because you are bumping/spamming like a ****ing spambot on every single thread. That's why.