[iamrocco]

I've followed Ultimate fool proof guide, I've installed e3 flasher, I've made a backup dump, I've flashed the other file and it was all ok. I rebuilted my ps3, entered in fsc and installed the two files, and then the other file. After that, the rogero's firmware was perfect, I've installed the qa flag but the debug's icon doesn't appear. But in the same way I entered in recovery mode and I installed 3.55 but at ~40% the ps3 shut down. And now my ps3 is brick, there is a way to solve this matter? Thank's a lot

[DEFAULTDNB]

Why didt you post it here: http://www.ps3hax.net/showthread.php?t=39766 so that @baileyscream could help you considering its his guide you used?

When you used QA toggle, did it beep and reset? did you then try the button combo on the network settings icon to verify it?

[iamrocco]

Yes ps3 beep and reset, but combo key doesn't function, but I'm so stupid that I've continued, it's a irresolvible problem?

[DEFAULTDNB]

Originally Posted by iamrocco Yes ps3 beep and reset, but combo key doesn't function, but I'm so stupid that I've continued, it's a irresolvible problem?

If you have a good verified dump, almost anything should be reversible.

@baileyscream @playerkp420 or @hellsing9 will know best about flashers and flashing, await their input now that I have @ mentioned them

[pereb27]

Originally Posted by iamrocco I've followed Ultimate fool proof guide, I've installed e3 flasher, I've made a backup dump, I've flashed the other file and it was all ok. I rebuilted my ps3, entered in fsc and installed the two files, and then the other file. After that, the rogero's firmware was perfect, I've installed the qa flag but the debug's icon doesn't appear. But in the same way I entered in recovery mode and I installed 3.55 but at ~40% the ps3 shut down. And now my ps3 is brick, there is a way to solve this matter? Thank's a lot

If the QA flag menu doesn't appear, it means it didn't QA flag properly, that's why you bricked when dehashing...
Anyway just do the downgrade process again. It should work if you don't do anything wrong.

[iamrocco]

Originally Posted by pereb27 If the QA flag menu doesn't appear, it means it didn't QA flag properly, that's why you bricked when dehashing... Anyway just do the downgrade process again. It should work if you don't do anything wrong.

So, in the end, which steps should I do differently from the guide? Should I connect NOR tristate and then flashing the old backup instead of flashing downgrade.bin?

[pereb27]

Originally Posted by iamrocco So, in the end, which steps should I do differently from the guide? Should I connect NOR tristate and then flashing the old backup instead of flashing downgrade.bin?

Pretty much.
EDIT : You can't restore your OFW backup. It has to be modified downgrade.bin.

[iamrocco]

I connect tristatenor to sbe, I flashed with flash fun my valid dump patched with auto patcher, it was ok, but when I connect my ps3 to the tv don't show anything and usb and HDD don't work. And then i can't shut down my ps3 beacuse if I push power button nothing happens, please help me!!

[playerkp420]

Originally Posted by iamrocco I connect tristatenor to sbe, I flashed with flash fun my valid dump patched with auto patcher, it was ok, but when I connect my ps3 to the tv don't show anything and usb and HDD don't work. And then i can't shut down my ps3 beacuse if I push power button nothing happens, please help me!!

Now that you have flashed the patched backup, put all switches down and reboot PS3.
You should see the connect controller screen. Do not connect controller and cut power by switch or pull the plug. Insert dongle, etc.......

[iamrocco]

It doesn't work but the log in the microsd card is perfect, can I reflash one more time another patched backup? Can I use flash fun without the link nor tristat --> sbe? Thanks, because when I turn on ps3 nothing happens, the had doesn't work and USB doesn't work, help