|
|
10-23-2011
|
#1 |
|
Apprentice
 Join Date: Oct 2010
Posts: 23
Likes: 1
Liked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
80gb BC PS3 Stuck in Update Loop
I Have a 80GB Backwards Compatible PS3 That Failed on the Stock 3.50 Update and This Console Never Had CFW of any Kind Installed.....
it is stuck in a update loop and Fails at 4% No Matter What FW i try..... Even if i don,t Have a usb stick in the ps3 and Switch Hdd,s it still finds a update and fails at 4% after The Failed attempts i Get this Message An error occurred during the update operation. (8002F0C1) A Local Modder Told Me it Was a Chip on my Board That is Bad Thats Why it Always Fails at 4% But i think He Talking B.S Because He offered $140 for it after i told him i don,t want to sell... Do u Guys think a Nand Programmer Would Fix My Issues.?????? or I Will try any other Options u Guys Might Have... |
|
|
|
10-23-2011
|
#3 |
|
Apprentice
Join Date: Oct 2010
Posts: 23
Likes: 1
Liked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
i tried that and even tried 2 Different Hard drives one new and one was from another 80gb BC PS3
but i will format it again...... EDIT: I Formatted The Hdd and Still Get The Same Error and Failed at 4% Last edited by livinglegend187; 10-23-2011 at 04:19 PM. |
|
|
|
|
10-23-2011
|
#4 |
|
Member
 
Join Date: Sep 2011
Posts: 878
Likes: 152
Liked 277 Times in 189 Posts
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
|
You might be using a bad PUP.
Download OFW 3.50 here : http://www.multiupload.com/2NW76RLOFN And install it via USB.
__________________
PS3 Slim CECH-3004A 160GB (500GB)
PS2 Slim SCPH-70004 - FMCB 1.8b |
|
|
|
|
10-23-2011
|
#5 |
|
Apprentice
Join Date: Oct 2010
Posts: 23
Likes: 1
Liked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Downloading it Now.....I Will Let u know What Happens
P.S I Have Tried Many Different PUP Files and always Get the Same Error... EDIT:I Tried it and I Still get the Same Error and Fails at 4% Last edited by livinglegend187; 10-23-2011 at 04:57 PM. |
|
|
|
|
10-23-2011
|
#6 | |
|
Senior Member
 Join Date: Jun 2009
Posts: 5,131
Likes: 1,883
Liked 1,794 Times in 1,174 Posts
Mentioned: 220 Post(s)
Tagged: 0 Thread(s)
|
|
|
|
|
|
|
10-23-2011
|
#7 |
|
Apprentice
Join Date: Oct 2010
Posts: 23
Likes: 1
Liked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Yes Still The Same Error.....
is There any Kind of Service Mode .HEX i Can Flash to one of My Dongles and Get into Factory Service Mode...and Try updating that way Would That Even Work????? |
|
|
|
|
10-23-2011
|
#8 | |
|
Senior Member
Join Date: Jun 2009
Posts: 5,131
Likes: 1,883
Liked 1,794 Times in 1,174 Posts
Mentioned: 220 Post(s)
Tagged: 0 Thread(s)
|
what about try downgrading in sevice mode to 3.41 then upgrade up the normal way there should be somethink on this site about hex files for sevice mode on this site Last edited by carldenning; 10-23-2011 at 05:22 PM. |
|
|
|
|
|
10-23-2011
|
#9 |
|
Apprentice
Join Date: Oct 2010
Posts: 23
Likes: 1
Liked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Well i Flashed The PSgrade.Hex to my AT90USB162 Dongle Put 3.41 on Usb along with The .self File and Can,t Get into Factory Service Mode Because The Tut Says i need to Power Cycle from the System Menu not the Power Button.....
Since i,m Stuck in the Update Loop i Cannot Get to the System Menu....... |
|
|
|
|
10-23-2011
|
#10 | |
|
Senior Member
Join Date: Jun 2009
Posts: 5,131
Likes: 1,883
Liked 1,794 Times in 1,174 Posts
Mentioned: 220 Post(s)
Tagged: 0 Thread(s)
|
|
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
|
|
