[Ahmedss79]

I've enabled upnp in my router but when setting a connection at the connection testing I get that upnp is not available
My router is linksys x-3000



Sent from my iPhone using Tapatalk

[V6ser]

Originally Posted by Ahmedss79 I've enabled upnp in my router but when setting a connection at the connection testing I get that upnp is not available My router is linksys x-3000 Sent from my iPhone using Tapatalk

Is a password problem if your password is WPA is hard to get access.

Can be also upnp configuration which is wrong if it is a new modem.

[OoZic]

Linksys X-3000 is a router with build in modem, the E series are only router (I own the E-3200 since Saturday)

First thing to check is if there are firmware upgrades for your modem/router on the cisco webpage...

How do you test de upnp connection and did you also test it with turned off firewall (software) ?

maybe try the test program on this site to find out what is wrong:
http://www.zultrax.com/forward-port/upnp.htm

[Ahmedss79]

Originally Posted by OoZic Linksys X-3000 is a router with build in modem, the E series are only router (I own the E-3200 since Saturday) First thing to check is if there are firmware upgrades for your modem/router on the cisco webpage... How do you test de upnp connection and did you also test it with turned off firewall (software) ? maybe try the test program on this site to find out what is wrong: http://www.zultrax.com/forward-port/upnp.htm

I've checked , there are no firmware upgrades the only firmware available is 1.0 which is the same one in the x-3000
As for testing the upnp I used the ps3 connection test
But I didn't try to turn off the firewall , all do that
And I'll try the program and return with the results


Sent from my iPhone using Tapatalk

[ZOMBIEKILLAH]

Originally Posted by Ahmedss79 I've checked , there are no firmware upgrades the only firmware available is 1.0 which is the same one in the x-3000 As for testing the upnp I used the ps3 connection test But I didn't try to turn off the firewall , all do that And I'll try the program and return with the results Sent from my iPhone using Tapatalk

I turned off my NAT on both of my routers, i am not scared of security ..
I had same problem but i fixed my issue .. I also unplugged my modem / router & reset everything ..Mine was as simple as that ..

[V6ser]

Originally Posted by ZOMBIEKILLAH I turned off my NAT on both of my routers, i am not scared of security .. I had same problem but i fixed my issue .. I also unplugged my modem / router & reset everything ..Mine was as simple as that ..

So, how lucky you are!!