[playerkp420]

Originally Posted by mikenrry Well, apparently the turn on by itself was because the ps3 was still disassembled or some of the 50+ wires were touching something. After removing e3 linker and assembly everything back, my ps3 work great again!. Thanks again!

Glad you got it sorted.

I seen you said you stayed at Rogero. I highly recommend that you still do Chapter 2, part2 "Qa flag". If you want Rogero just use that again on the last step.
It will save you from a headache later, if you ever have to install OFW 3.55 to fix something. You never know.

IMO the downgrade process is not complete until the syscon hashes are dehashed. This will make your ps3 like it was never downgraded. So you will never have to worry about bricking, if you ever decide to change firmwares in the future.

[ps3333]

Originally Posted by playerkp420 Glad you got it sorted.

I downgraded my console successfully. now im trying to do my friends and when i try to make a back up of the nor im getting this error Problem state 6
11000100 - corrupt backup of PS3 data
then when i check the log is says not original ps3 any idea?

[playerkp420]

Originally Posted by ps3333 I downgraded my console successfully. now im trying to do my friends and when i try to make a back up of the nor im getting this error Problem state 6 11000100 - corrupt backup of PS3 data then when i check the log is says not original ps3 any idea?

You need to update the flasher with the Samsung 10.28 update.bin. That update is to use your e3 flasher on multiple consoles.

You can get the update.bin from the downgrade any pack in this guide.

Good luck.

[Bigbones87]

@playerkp420 hey man, I am going to update from rogero v3 to the newest one. V3.5 I think? , I don't need to do anything other than update, right? Should I do it in the XMb or recovery menu? Thanks man

[playerkp420]

Originally Posted by Bigbones87 @playerkp420 hey man, I am going to update from rogero v3 to the newest one. V3.4 I think? Do you know where a legit link is to it and just to make sure, I don't need to do anything other than update, right? Should I do it in the XMb or recovery menu? Thanks man

You can get it from the "downgrade any pack" link in the spoiler "things you will need".
It is in the CFW folder on the mediafire page.

[Bigbones87]

Should I go with the v3.4 or v3.5 and do I need to do anything special? Just update thru XMb or what?

[playerkp420]

Originally Posted by Bigbones87 Should I go with the v3.4 or v3.5 and do I need to do anything special? Just update thru XMb or what?

V3.5 has 3.56 and 3.60 keys built in. But I think the 3.60 games still need to be fixed. You can read about it in the Rogero v3.5 thread.

All you have to do is update from xmb.
Normally everyone says you should go to OFW 3.55 from recovery menu first when switching CFWs. But I seen @Rogero post that you can just install his CFW over the old version.

[mikenrry]

Originally Posted by playerkp420 Glad you got it sorted. I seen you said you stayed at Rogero. I highly recommend that you still do Chapter 2, part2 "Qa flag". If you want Rogero just use that again on the last step. It will save you from a headache later, if you ever have to install OFW 3.55 to fix something. You never know. IMO the downgrade process is not complete until the syscon hashes are dehashed. This will make your ps3 like it was never downgraded. So you will never have to worry about bricking, if you ever decide to change firmwares in the future.

Hi my friend, thanks for everything. Look, i did chapter 2 part 2 Qa Flag. I heared the beeps, as you said, after that, tried the combination L1+L2+L3 etc, but i couldn't see any new options under network settings.
After that, when i had to install OFW3.55_PS3UPDAT.PUP, i got a brick again, or at least, a black screen. When it was installing, the ps3 restarted in a black screen.
So i decided to work with e3 flasher again, since e3_downgrade step, and after doing the dongle step, it suddenly start in 3.55 ofw i guess.
Since there, i decided to install CFW rogero 3.5 again from xmb menu.

So, if you understood what i wrote above, i would like you to suggest what should i do now. The ps3 is working great!
Thanks for your time my big friend!

[xtsgeditz]

aneyone know how to unbrick a ps3 from a failed e3 flasher downgrade, but only 1 problem i dont have the original bios and my friend told me to find someone who has the same model number (cech 2102a) and get their bios and i was wondering if aneyone has a good set of bios and if i cannot get some bios is there any way of unbricking my console and i you have any knowlege of unbricking using an e3 flasher or hou to unbrick it plse add me on skype (xtsgeditz9712)
psle respond asap

[bobbysaran1234]

guys i only have e3 flasher limited edition so can i downgrade without micro sd card cuz i only have usb + e3 flasher limited can u help me