[v8s10]

Originally Posted by rot and nope they were bad... time to sell console on ebay.

Did you have someone else check them?

[stdule]

1. When making your first dump, make 100% sure you have a good dump, make several to be safe and compare them with HxD. If you don’t have a good backup and erase your NANDs then you’re pretty much screwed... THIS IS IMPORTANT!

2. Once you have your NAND flash dumps, use FlowRebuilder v.4.1.3.2 unscramble then interleave flashes into one unified dump. Let’s call the output file 256Mb.bin
3.Then use Winskeet 4000-patcher and patch file 256mb.bin. 5. Again open FlowRebuilder v.4.1.3.2 and this time we want to Re-scramble the modified dump then de-interleave it into two new flashes. Choose your flash0.bin, flash1.bin and the 256Mb.bin you modified. When done it should say 42 or 47 blocks modified each NAND depends on if you only did one or both patches

Now you end up with 2 new files called flash0.bin.new.bin and flash1.bin.new.bin. link too patch:http://www.mediafire.com/?kkzhz1zejubbuzq

[stdule]

your dump looked good no errors.

[rot]

Originally Posted by stdule your dump looked good no errors.

i had someone on the irc look at it and they said it wasnt. and after i even looked at it again there is a big section with 00 00.

[stdule]

then dump 3X again and compare them with HxD!!!!!