[zoids]

Hi ! I make TUTORIAL For Your PS3 is problem with Clip on E3 Flasher

And review " E3 Clip Suit " You Can DownGrade Slim

1. wire Cable for E3 Linker
2. look For Your motherbord Ps3 Pinout in wiki

http://www.ps3devwiki.com/wiki/Hardware_flashing

3.Wire Cable E3/ motherbord
4.Flashing your PS3 with Step For E3 Normal Or Unbrik PS3 for Brick
And You Have Original Bios
5.Finish uninstall wire Cable or Install iT if you want use it

* The Point for Pinout to Logic E3 Linker

OE > NOE
GP0 > CE
WE > NWE
RDY (RY/BY) NW/AIT
GP1 > Reset
3.3V VCC > VCC and BVCC

[jhax78]

don't say tutorial for nand if ur flashing a nor lol
these pictures are not from a nand but nor console because slims have no nands
this **** is just for debricking so you can solder it to the ps3 directly

it won't solve 90% of the E3 bricks tho because it fails to backup properly

[zoids]

Originally Posted by jhax78 don't say tutorial for nand if ur flashing a nor lol these pictures are not from a nand but nor console because slims have no nands this **** is just for debricking so you can solder it to the ps3 directly it won't solve 90% of the E3 bricks tho because it fails to backup properly

thank for comment i Test slim Console is nor on DYN-001/JSD-001/JTP-001

FOR NAND 256MB in FAT COK-001/COK-002 won't test

Edit Thread for fix

[Sh4n]

Hi i have e3 linker too and i need a tuto for nand ps3 !
Your work is very interesting ! =)
I think your method is good for downgrade nand.
Thank you !

[paxsah]

Thank you for showing the pics, would be grateful for a more step by step tutorial. E3 flasher solderless did not wotk in in cechk03. I got error 10001100when trying to save bios, I wanted to try by soldering and use linker but sadly no tutorial. Any help will be appreciated and thank you in advance.

[playerkp420]

I should be getting one of these soon. I ordered it a week ago.

I love the pics. I am hoping the solder points are the same as progskeet and are labeled on the linker.

If I have success with it when I get it, I'll make a tutorial with detailed pics. Maybe a video too.

[playerkp420]

Originally Posted by zoids thank for comment i Test slim Console is nor on DYN-001/JSD-001/JTP-001 FOR NAND 256MB in FAT COK-001/COK-002 won't test Edit Thread for fix

What do you mean FOR NAND 256MB in FAT COK-001/COK-002 won't test?

I just got my e3 linker and want to try it on a CECHA01. But read on ps3devwiki not to solder wires to testpoints on COK-001?

[nzie]

Originally Posted by playerkp420 What do you mean FOR NAND 256MB in FAT COK-001/COK-002 won't test? I just got my e3 linker and want to try it on a CECHA01. But read on ps3devwiki not to solder wires to testpoints on COK-001?

this stuff can be used on all nand models?

[arcadekidflo]

How many points you must solder on a NOR console ?

[playerkp420]

Originally Posted by nzie this stuff can be used on all nand models?

I believe you can. I am gonna try to downgrade a nand model with it, and make a guide. Trying to research a little first, but there is no info on this thing.
zoids looks like the only user on the internet to use it.
Only problem I have is when I look at the pic for COK-001, on ps3devwiki, it says underneath "COK-001 EBUS testpoints (cannot use with hardware flashers)"
Still trying to figure out what that means.

Originally Posted by arcadekidflo How many points you must solder on a NOR console ?

Not sure exactly how many, but I believe you can use the pics on ps3devwiki, to find the points on your motherboard.