[playerkp420]

I have done a lot of that model. It will work, but can be a pain to get the clip flush with mobo.

I did this to my clip and never have a problem anymore.

The no leds is a bad connection somewhere. Or the points on the bottom of the flasher are touching metal.

[Freesty]

I will try this. My flasher cant touch anything because i only connect heatsink with fan on mobo and flasher is just connected in sata without metal cage

[Freesty]

i resolve problem. but you cant believe what was the problem.
i put update.bin on sd but renamed in upgrade, afer change this dumping bios pass excellent.

[haz367]

so the problem was multiple console errors, indeed u must use "samsung update"
the file is called "update.bin" and not upgrade.bin

update.bin works ofcourse, can anyone with E3 installed just check this...to see if it picksup "upgrade.bin"

cuse it's switch 1-2 down/3-6 UP, samsung update on SD card, boot PS3, it updates, all 8 leds light up at once! and stay like that, update.bin removed from SDcard, E3 updated!

and no need to do this every time with another console btw..if u used the samsung multiple console update, doing this 1 time only is enough

[Freesty]

i think that we need to make one thread in tutorials and updating it with this things
************* [ - Post Merged - ] *************
console downgraded and work.

[Freesty]

yes but again only console work. but gaia and ftp server dont. just black screen and must power off console. what i`m doing wrong?
************* [ - Post Merged - ] *************
and now i install kmeaw and brick console. exactly like my fat ps3

[playerkp420]

Originally Posted by Freesty yes but again only console work. but gaia and ftp server dont. just black screen and must power off console. what i`m doing wrong? ************* [ - Post Merged - ] ************* and now i install kmeaw and brick console. exactly like my fat ps3

You needed to dehash the syscon checks, before installing kmeaw.

You will need to solder a wire from sbe to tristate. Then flash the backup you made after you downgraded.
If you rushed and bricked without making a backup after downgrade, follow this guide.

The reason you get a black screen when opening any homebrew apps is probably because you don't have the blue ray drive connected. You need a working bd logic board, that is married to your mobo, for any apps to work.

[Freesty]

i have 3 backups but original from 4.11, after downgrade i dont have.
maybe is problem that i first install rogero v3d no 3.1 i have a little mess on hdd.
but my bd drive is connected only laser not work
i found 2 different tutorials for this unbricking: one say to solder tristate and other say not need so what can i do?

[playerkp420]

If your ps3 will stay on to use flash fun mode(1up,2-6down) then you do not have to solder the wire.

[Freesty]

i need to solder. just to be sure, is this(red point on picture)point where i need to solder?
http://img138.imageshack.us/img138/8346/imag00931.jpg