[joemuscles]

Hello Members

I have a PS3 Fat Model# chechh01
Motherboard DIA-001.
System version is on 3.66.

Still waiting on my E3 Flasher, but wanted to post pics from ps3wiki of my board that I edited, so someone could verify for me that I'm right about the locations of the board to solder and clip the E3 Flasher to.

The first pic is of the topside of the motherboard with showing the nor chip if that's it? lol yeah I need some help.

That is where the e3 clip will attach to? I'll make sure once I validate the backup which I'll probably need help with that too. & I do the downgrade successfully, I want to have the double boot feature. So I can go from cfw to ofw. Also in the first pic is a resistor to unsolder to do the double boot feature on the E3 Flasher.

I saw for this PS3 Phat on this site, showing how to unsolder the resistor then solder the left pin to sbce on the e3 flasher. I have marked on the pic if that is the correct one that gets solder to the sbce of the flex cable on the e3 Flasher. The other pic is of the bottom side where after looking a wiki I believe is the nor tristate to solder to the sbe of the e3 flasher flex cable.

Also the SBCE is only used for double boot feature &
SBE is only just in case your brick your ps3?

DIA-001_Bottom of Motherboard.JPG

DIA-001_Topside of motherboard.JPG


Thanks in Advance

[hellsing9]

Joe please to get a better look on those pics, upload them on photobucket and direct link it to the thread.
Full size.

Since the attachments methos works soooooo bad.

[joemuscles]

http://i1079.photobucket.com/albums/...otherboard.jpg


http://i1079.photobucket.com/albums/...otherboard.jpg

sorry the first two pics weren't that great,
Also it seems when i upload them you copy them and as you magnify the pic it lose quality. let me know? I'll be back later

Thanks

[joemuscles]

Originally Posted by hellsing9 Joe please to get a better look on those pics, upload them on photobucket and direct link it to the thread. Full size. Since the attachments methos works soooooo bad.

Hey hellsing, I uploaded it to photobucket, but examining it from there seems worse. I looked at the original uploaded pics through the attachment and it looks pretty good you can zoom in on it with no lose of pic quality as with photobucket it does. Let me know

[hellsing9]

@joemuscles there you have to put the CLIP of E3 Flasher, but be careful with the flex (since it's very fragile.)
You have to do tristate?

[hellsing9]

Originally Posted by joemuscles Hey hellsing, I uploaded it to photobucket, but examining it from there seems worse. I looked at the original uploaded pics through the attachment and it looks pretty good you can zoom in on it with no lose of pic quality as with photobucket it does. Let me know

Im trying my best with my bloody eyes (im have no contact lenses...). :P
Forget photobucket.

You already checked in ps3devwiki? = click

[joemuscles]

Originally Posted by hellsing9 @joemuscles there you have to put the CLIP of E3 Flasher, but be careful with the flex (since it's very fragile.) You have to do tristate?

I see you upload my pic highlighted the nor chip, you can't see the other stuff I edited in the pic? also your pic of mine you edited, I can't zoom in to see what I did original to the pic. What software must I use to show you?
************* [ - Post Merged - ] *************
I noticed when you click on the original attachments on my first post. It goes to a little sized pic, then exited the window comes the large pic. From there you can zoom it hope that helps. the pics i original uploaded I can go into a basic pc application " Paint" click edit then zoom in and see the entire pic with no loss of quality.

[hellsing9]

Last resort if you want to try, since i can see something edited but i cannot read it well.
Use = http://imgur.com/ You can create an account there and direct link the image. (if you want your image to be private).

Forget about attachments on the thread, mess all the image and the quality is worse. I don't think on any software but if you have a camera with an can *retake* those photos will be cool or just try to resize them keeping aspect/ratio.
If you can't it's ok we will work with these.

[joemuscles]

Ok looks very good with this website no loss of pic quality & you can see everything I edited and wrote on both pics.


http://i.imgur.com/PYDwr.jpg

http://i.imgur.com/0sN36.jpg

[hellsing9]

The best i can find..for the moment.

Check this = click

The tristate it's to debrick:

from my experince soldering a wire to the nor tristate point did nothing, try this method instead. manually patch your nor backup. place the patced backup and the e3_downgrade.bin file onto the SD card then put all the switches on the flasher down and hold start and turn on the console. if the console stays on and the flashing process begins when completed after rebooting the console should boot normally on the firmware you were trying to install, if you see two blue flashing lights and the console just turns off try this.. all switches down except the 6th one (lock/unlock) hold start on the flasher and turn on the console providing that the console stays on once finnished flashing DO NOT TURN THE CONSOLE OFF instead put the last switch down and press start again. once finnished reboot and hopefully the console should be back to life.