[haz367]

Originally Posted by warrengarner also after patching with nor patcher cvrtm is present as for more files in ros2 folder

keep trying?!

for "cvtrm" being present after using the patches..is impossible as "cvtrm" piece is per console and isn't magically there after using either "manual patches+flowrebuilder" or with Rogero's patcher, that would be a great magic patch lol

they just patch COREOS to 355.... again ONLY if ROS0/1 is not fully complete e.g it is really corrupt on NORFLASH then this kind of brick is fixable by patching it...nothing else, if only ROS0/1 is incomplete of not dumping a "full backup" then this aply to but ofcourse silly as it's important making first a valid/complete dump where everything+ "per console key stuff" is intact

pc 	A 	cvtrm 	0xEC0000 	0xEFFFFF 	0x40000 	(262,144 bytes)

bit off-topic..after seeing the above (262,144 = 40000 hex) here about that other guy and the "dump that makes no sense" where i told that the bootloader_0 is way off..he isn't telling full story either as it looks a combo of stuff with "cvtrm and bootloader_0" same size = 262,144 bytes)...meh it may be i need to quit the smoking..i don't know

[noobzega]

Need help, I dont understood how to go from here:

2.7.3 - Search now for the following Hex code: 617365637572655F6C6F616465720000
2.7.3.1 -in Hxd, do ctrl+f change the datatype field for HEX, Copy and paste the code, it should be found and looks like the following: http://www.ps3devwiki.com/wiki/Flash#example_3
2.7.4 - verify the entry table trv_prg0
2.7.4.1 - search for SCE in text mode, and it should looks
like: http://www.ps3devwiki.com/wiki/Flash#example_28

2.7.5 - press f3 and several SCE data should be found, and the last one should be SCEI (check: http://www.ps3devwiki.com/wiki/Flash#example_39 (cvtrm))

2.7.6 - verify the HDD info
2.7.6.1 - searcg for your HDD brand ( ctrl+f and in text
mode type the disk brand) or else ctrl + g and it sould be in the 00f20200 offset
2.7.7 - search for your Serial - (http://www.ps3devwiki.com/wiki/Flash#example_20)
2.7.1.1 - it should be in offset 003f090 , you can also look for the 2nd part of your serial number (ex: xx-12345678-xxxxxx-cechxx)

Here is my picture:

http://upload.slike.com/slike/AepM8.jpg

[arpan424]

thanks for the info!!

[simon]

Mine says IF.I but I read 0FACE0FF 00 00 DE AD BE EF. BwE says is a valid dump. Weird.

[BwE]

this thread makes me giggle

[bajasu520]

Hi guys ! (SR for my bad Eng)

I have created a dump for FAT CECHH (mobo DIA-001), I was dump 2-3 times and them are same....

Attention

DO NOT POST LINKS TO YOUR DUMPS IN PUBLIC, YOUR DUMPS CONTAIN VALUABLE INFORMATION

But when I attached BD and HDD...I put usb with Rogero 4.40=> my ps3 show "checking...plz wait" but the icon from the right bottom is spin and stop...spin and stop

I was tried another USB, HDD and....

Plz help me ( I haved success with 10 SLIM and 1 FAT CECHP04)

Thanks !

[Jpond83]

Remove the link to your dump, not very smart. Anyone can can steal your idps and get you banned. @bajasu520

[hellsing9]

Please @Jpond83 don't quote someone who recieved an attention or warning. Just mention him.

Because everyone will start to quote you or the users who got an attention/warning and thread turn to a mess.

Thanks

[Jpond83]

Originally Posted by hellsing9 Please @Jpond83 don't quote someone who recieved an attention or warning. Just mention him. Because everyone will start to quote you or the users who got an attention/warning and thread turn to a mess. Thanks

got ya..........I'm sure i quoted way before the warning though.

[hellsing9]

Originally Posted by Jpond83 got ya..........I'm sure i quoted way before the warning though.

No problemo man