[dlbogdan]

Originally Posted by Crazy-S Have you connected the Ps3 to the Internet via Ethernet?

I've managed to convert to DEX pretty straight forward, one would think that I wouldn't have any problems understanding basic networking.
Yes, my console is wired to a gigabit network, the same as the PC.
This is not a network problem, and is not an operating system problem. As i stated before, I've tried with two different computers (with XP and 7) two different cables and two different switches.



----------------------------------

Originally Posted by S.B.M try this it worked for me Make sure that Settings > Debug Settings > Release Check Mode = Development Mode. Settings > Debug Settings > Wake on LAN is On. Settings > Debug Settings > Boot Mode is not set to Release Mode.

I'll try it later today. I'm very sure I've played with "Release check mode" the day I've converted to dex but Wake on LAN is 100% on.

Thank you!

[S.B.M]

@gingerbread
for me I updated to 4.20 dex then went back to 3.55 using 3.55 downgrader.pup
4.20 DEX downgrader.PUP didn't work for me, show error on target manager .

[gingerbread]

Originally Posted by S.B.M @gingerbread for me I updated to 4.20 dex then went back to 3.55 using 3.55 downgrader.pup 4.20 DEX downgrader.PUP didn't work for me, show error on target manager .

Interesting!

So to summarise:

Say we are only ProDG/TM to perform system updates.

From CFW DEX 3.55 to go OFW DEX 4.20 :
1. Simply use OFW DEX 4.20

From OFW DEX 4.20 to CFW DEX 3.55 :
1. Use 3.55 Downgrader PUP
2. Use CFW DEX 3.55
or
1. Simply use Rogero DEX-3.55 V2. (Eliminates the use of 3.55 Downgrader PUP)

Correct?

Thank you.

[dlbogdan]

Originally Posted by gingerbread Interesting! So to summarise: Say we are only ProDG/TM to perform system updates. From CFW DEX 3.55 to go OFW DEX 4.20 : 1. Simply use OFW DEX 4.20 From OFW DEX 4.20 to CFW DEX 3.55 : 1. Use 3.55 Downgrader PUP 2. Use CFW DEX 3.55 or 1. Simply use Rogero DEX-3.55 V2. (Eliminates the use of 3.55 Downgrader PUP) Correct? Thank you.

I've updated and downgraded through xmb menu a dozen of times. No problems...

[S.B.M]

@gingerbread
I can confirm only the stuff I tested my self
you can update to 4.20 dex and go back to 3.55 downgrader without any problem from xmb or TM ,
Rogero DEX-3.55 V1 cannot be installed from 4.20 on xmb, recovery mode or TM but install w/o problem on 3.55 downgrader.
i didn't test Rogero DEX-3.55 V2.

[aries2k]

Originally Posted by S.B.M try this it worked for me Make sure that Settings > Debug Settings > Release Check Mode = Development Mode. Settings > Debug Settings > Wake on LAN is On. Settings > Debug Settings > Boot Mode is not set to Release Mode.

Thank You.!!!!
That did the trick. I´m now connected.
I really apreciate it that you took the time to help me out.
Some great users here at PS3Hax.

[gingerbread]

Originally Posted by S.B.M @gingerbread I can confirm only the stuff I tested my self you can update to 4.20 dex and go back to 3.55 downgrader without any problem from xmb or TM , Rogero DEX-3.55 V1 cannot be installed from 4.20 on xmb, recovery mode or TM but install w/o problem on 3.55 downgrader. i didn't test Rogero DEX-3.55 V2.

Thanks for your reply.

I manage to go up (4.20 DEX) and go down (Rogero DEX-3.55 V2)

My Findings:

I only ProDG/TM to perform system updates.

At every update, unlike normal update, PS3 will shutdown at the final step and will not auto boot up. You have to long press ps3 till 1st beep to reset display.

From CFW DEX 3.55 to go OFW DEX 4.20 :
1. I simply use OFW DEX 4.20

From OFW DEX 4.20 to CFW DEX 3.55 :
1. I Use 3.55 Downgrader PUP ->
After this step, I long press ps3 till 1st beep to reset display. I notice a grey screen with debug wordings with ip adds below. Did you notice this?
2. I Use Rogero DEX-3.55 V2

After installing Rogero DEX-3.55 V2, I long press ps3 till 1st beep to reset display. PS3 was back to DEX 3.55 CFW.

Thanks you.

[dlbogdan]

Originally Posted by aries2k Thank You.!!!! That did the trick. I´m now connected. I really apreciate it that you took the time to help me out. Some great users here at PS3Hax.

Yap, mine works as well.
Only that it doesn't matter Settings > Debug Settings > Boot Mode.

[haz367]

setting Wake on LAN - ON, the fan keeps spinning slowly in stand-by mode, just like with remote-play ON, atleast on my end
disabling Wake on LAN puts the fan off like normal, btw using the file from 355 updater on the wiki downgrades back to 3.55 also just fine

[Squarepusher2]

Originally Posted by stadicon It does (tested on 4.11 DEX with a CECHL). Everyone should be aware, thought, that this increases the total workload of the unit (even more), thus increasing the chances of a YLOD.

This is just a scare tactic - it increases the 'workload of the unit' - yet CoreOS swapping by itself does not?

YLOD is like RROD - it's one of those things that will eventually pop out of the woodwork and bite you in the ass - YLOD has happened on non-jailbroken PS3s too so it's pretty much Russian Roulette. Blame Sony and MS for releasing such broken hardware - that's the culprit there - made in China - not made to last and all that jazz.