[annern55]

Hey, I just started the backup process, When I sat in the sd micro card, and the eseta station cable into the ps3, and turn'd on my eseta and then ps3, all the lights are fine, but the blue ones never comes, it's like this all the time: a14a9e0d98e8da4d1c016f5dff318292.png
Will my ps3 brick if I turn it off now? I really need some help fast!
And even before that it didn't make any contact at all! No lights lit, and the ps3 said no external hardrive found unable to turn on system or something like that, when I take away the board of e3 flasher and connect the eseta cable, it turns on perfectly fine, it has to be the connection between the hardrive and the ps3.

[Bigbones87]

The image didnt you posted didn't turn into a link? It will not brick unless you have started the downgrade process already. The backup process does not write to the nor so you will not brick at anytime during the backup process.
************* [ - Post Merged - ] *************
You need to make sure that the flasher is plugged in to the hard drive bay good. Is this system a fat?

[annern55]

Originally Posted by Bigbones87 The image didnt you posted didn't turn into a link? It will not brick unless you have started the downgrade process already. The backup process does not write to the nor so you will not brick at anytime during the backup process. ************* [ - Post Merged - ] ************* You need to make sure that the flasher is plugged in to the hard drive bay good. Is this system a fat?

Yea, the system is fat, checl04. The toturial to playerkp420 says 1 and 2 down, and the rest up, if I do that nothing happens, but if I take 1 and 2 up, and the rest down, the blue lights lit, like it's 4 lights changing to the other 4 lights every second.
And yeah, sorry for that: http://gyazo.com/a14a9e0d98e8da4d1c016f5dff318292
Also, where's the reset button because "3. Set the switches on your e3 1 and 2 down and the rest up. Turn on the ps3. All 8 blue led lights light up and means your flasher has taken the update. Press the reset button."
The next step also includes the reset button.

[Bigbones87]

Do you have Skype? The reset button is underneath the sata input on the flasher. It is red.

[annern55]

Originally Posted by Bigbones87 Do you have Skype? The reset button is underneath the sata input on the flasher. It is red.

Yea, I would love if you could help me out with a few things, my name is annern55

[Bigbones87]

Tried to Skype you but got no answer
************* [ - Post Merged - ] *************
You can check online about those errors. That error indicates failure to initilize nor which means the clip isn't seated properly. That error is 01001100 1 meaning lit and 0 meaning not lit. They are a pain in the ass to get seated properly, but the outcome is worth it. Check with playerkp420, he sanded down one side to get it to sit better or something like that. I never had to do that, but you have to make sure there is constant pressure on all sides of the clip by putting hard foam or coins on top of the clip itself and use really sticky tape. Ask on here if you have any questions. Sorry I couldn't be more help.