[itsamagic]

Originally Posted by OCEAN2712 My ps3 model is cech 3008b is there any jail break for it? Please help me guys. can i update Rogero CEX-4.30 v1.00?

No, not possible at all.

[gusha]

SUCCESS! :D

PS3 Slim - CECH - 2004B
Out the box: 3.15
Update: 3.55
CFW: 3.55 KMEAW
CFW: 4.21 ROGERO
Downgrade: 3.55 ROGERO Downgrader
CFW: 3.55 KMEAW
CFW: 4.30 ROGERO

Happiness!

[kanekz]

Originally Posted by xxxblitzxxx question what is QA ?? =)

They are talking about the QA flag on/off setting. Here you go:

The QA flag must be always Enabled on your PS3 for safer upgrading/downgrading operations.Link ----> toggle_qa.pkg

- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

[TDMaster]

well : install it on 2001A from Recovery outputs crroupt data i guess downgrade is a must

[xxxblitzxxx]

Originally Posted by kanekz They are talking about the QA flag on/off setting. Here you go: The QA flag must be always Enabled on your PS3 for safer upgrading/downgrading operations.Link ----> toggle_qa.pkg - Enable QA flag by following these steps: 1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg 2- Put the "toggle_qa.pkg" on USB and Install it on the PS3. 3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB. 4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time): L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

tnx mate

can i downgrade via update and what file should i download tnx in advance =)

[GOD_666]

@DEFAULTDNB hey mate i'm using memdump to get a backup flash but flowrebuilder says error when i try byte reverse and extract nor dump am i doing something wrong or is there another program to check my nor dump

thanks in advance

[popcorn900]

is this a kiosk or sex firmware? because playstation home and my channels always say can not load or run in demo mode.

[argedunknwon]

i cant downgrade my ps3 it says i have same firmware damn
************* [ - Post Merged - ] *************
no aplicable update help

[DEFAULTDNB]

Originally Posted by GOD_666 @DEFAULTDNB hey mate i'm using memdump to get a backup flash but flowrebuilder says error when i try byte reverse and extract nor dump am i doing something wrong or is there another program to check my nor dump thanks in advance

@baileyscream , @playerkp420 , or @hellsing9 will know a lot better than me mate. I have never used flowrebuilder.

[PiDuT]

Was on Rebug 3.55.2 went to recovery mode and installed Rogero 3.55 v3.7 and then directly after recovery mode and installed Rogero 4.30 v1.0.

Rebug 3.55.2 > Rogero 3.55 v3.7 > Rogero 4.30 v1.0 using Condor Updater 2.0 to enter recovery mode.

Works like a charm.