|
|
#1 |
|
Member
![]() Join Date: Jan 2013
Posts: 97
Likes: 37
Liked 3 Times in 2 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
E3 FLASHER PROBLEM
Hi guys. Well, I bought the e3 flasher and I downgraded following the guide from your site. I opened the ps3, I put the flasher and closed the console. I put empty sd (fat 32) in there, lock it, puted down the first 2 buttons and opened the ps3. The problem now is this. Once I opened the Ps3 can not close it with anything. I must stop the power from behind (unplage the cable). Although I did it after 1 minute, I went to step two said that the 3 should be above all other down. Well I do, I open the ps3, but nothing happens. Nor can I close or make some progress with and the blue lights are not flashing sequence 1-3-5-7 and 2-4-6-8. The best part is that after some time (1-2 minutes) Ps3 closes by itself and the red light blinks! I read that my console was bricked. The thing is that I did not manage to do some back up the FW.
What could have been? Or what can be wrong? PS: Its a downgraded console. I'm 100% sure it is a NOR CHIP. PS1: I have correctly installed the flasher PS2: I have the simple version (e3 flasher standar edition) but need someone tough as I read in the forum ps3hax. |
|
|
|
|
|
#2 | |
|
Member
![]() |
the only thing i can say is: what console do you have? CECH***** and i think you need the limited version to downgrade a console... du you have a FSM dongle? what did you exactly try to do... downgrade from OFW 4.XX to 3.55? and do you have a valid dump?
__________________
|
|
|
|
|
|
|
#3 | |
|
Senior Member
![]() Join Date: Jul 2012
Posts: 1,057
Likes: 71
Liked 255 Times in 204 Posts
Mentioned: 45 Post(s)
Tagged: 1 Thread(s)
|
|
|
|
|
|
|
|
#4 |
|
Member
![]() Join Date: Jan 2013
Posts: 97
Likes: 37
Liked 3 Times in 2 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
My console is this CECHL 04
I read here that you dont need to have limited version. 1. I will use my psp as a FSM dongle 2. I tried to downgrade from OFW 4.21 to 3.55 3. I hadn't reached to this step... I followed this guide: http://www.ps3hax.net/showthread.php...lasher+problem |
|
|
|
|
|
#5 | |
|
Senior Member
![]() Join Date: Jul 2012
Posts: 1,057
Likes: 71
Liked 255 Times in 204 Posts
Mentioned: 45 Post(s)
Tagged: 1 Thread(s)
|
|
|
|
|
|
|
|
#6 |
|
Member
![]() Join Date: Jan 2013
Posts: 97
Likes: 37
Liked 3 Times in 2 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
I used this guide http://www.ps3hax.net/showthread.php...lasher+problem
I am now in chapter 1, part 2, make some bios backups. From this spoiler i am at the third step. Hadn't reached further... Sorry for my english. |
|
|
|
|
|
#7 | |
|
Senior Member
![]() Join Date: Jul 2012
Posts: 1,057
Likes: 71
Liked 255 Times in 204 Posts
Mentioned: 45 Post(s)
Tagged: 1 Thread(s)
|
|
|
|
|
|
|
|
#8 |
|
Member
![]() Join Date: Jan 2013
Posts: 97
Likes: 37
Liked 3 Times in 2 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
well now you mention it my fan is not working!! I turned it on and I realised this... If the fan doesnt work properly am i going to have problem right? Also if I buy a new motherboad is it going to be ok?
|
|
|
|
|
|
#9 |
|
Senior Member
![]() Join Date: Jul 2012
Posts: 1,057
Likes: 71
Liked 255 Times in 204 Posts
Mentioned: 45 Post(s)
Tagged: 1 Thread(s)
|
That is why your console is powering off. Do you have the fan plugged in? I know it is a silly question but it needs answered. Also where are you going to get a new mother board? Double check you have your fan plugged in and then post in the guide you are following and we can take it from there.
|
|
|
|
|
|
#10 |
|
Member
![]() Join Date: Jan 2013
Posts: 97
Likes: 37
Liked 3 Times in 2 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
The cable is plugged but this white thing that is in motherboard has been broken...
Post to this guide http://www.ps3hax.net/showthread.php...lasher+problem? Last edited by nick64; 01-13-2013 at 12:01 PM. |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
|
|