[tastyratz]

If I press reset when the ps3 is off it powers on. doesn't eject but powers on. I can manually eject disc from the xmb, but the button won't work. no response from touching it once running and power works fine.


I would get it if the button just didn't work and think I need a panel but...

any ideas?

[Mr.Dutch]

@tastyratz , if you insert a disc a little, dous the ps3 take it in, or from standy inserting a disc dous the ps3 turn on?

[tastyratz]

it does actually, it pulls the disc in still. I can change games/movies no problem never a hiccup.

[redtree]

I had a similar problem myself with a phat CECHJ PS3 where I could only eject the disk via the triangle button on the XMB. I cleaned the ribbon cable ends for the blu ray drive with a cotton bud and isopropyl alcohol. I did the main cable from the logic board to the PS3's motherboard, as well as the one for the loading sensor and motor. Also removed the 4pin power cable from the side of the blu ray drive and reseated it. It started working properly after that.

[arj1231]

i had a prob like this also, turns out the tray skipped a notch on the tray gear just had to pull it apart and pust it up a notch