[monu1232009]

Originally Posted by baileyscream damn!!!!!! bloody deleted it all instead of saving it!!!! this is a quick check. i did have what was wrong and a propper comparison but this will have to do. click to open bkpps30.bin DEADBEEF FACEOFF headder at offset 10 IFI at offset 200 table at 400 - 600 is correct FACEOFF FACEOFF headder at offset f00010 .............bad everything is doubbled up here!!!!! (but good on bkpps31) asecure_loader (folder) > metldr: size E9 60 correct for CECH-25xx (JSD-001) & CECH-25xx (JTP-001) boards ros0 (folder) > aim_spu_module.self > creserved_0 > default.spp > emer_init.self > eurus_fw.bin: *****differences****** > hdd_copy.self > lv0 > lv0.2 > lv1.self > lv2_kernal.self*****differences***** > manu_info_spu_module.self > mc_iso_spu_module.self > me_iso_for_ps2emu.self > me_iso_spu_module.self > pkg.srvk > prog.srvk > sb_iso_spu_module.self > sc_iso.self******differences****** > sdk_version > spp_verifier.self > spu_pkg_rvk_verifier.self > spu_token_processor.self > spu_utoken_processor.self > sv_iso_for_ps2emu.self > sv_iso_spu_module.self*****differences***** ros1 (folder) > aim_spu_module.self > appldr > creserved_0 > default.spp > emer_init.self > eurus_fw.bin > hdd_copy.self > isoldr > lv0 > lv1.self*****differences****** > lv1ldr > lv2_kernel.self*****differences***** > lv2ldr > manu_info_spu_module.self*****differences***** > mc_iso_spu_module.self > me_iso_spu_module.self > sb_iso_spu_module.self*****differences***** > sc_iso.self > sdk_version > spp_verifier.self > spu_pkg_rvk_verifier.self > spu_token_processor.self > spu_utoken_processor.self > sv_iso_spu_module.self bootloader_0: size 2F570 & 2F 53 at 02 & 12 correct for CECH-25xx (JSD-001) & CECH-25xx (JTP-001)boards cCSD same as bkpps31 (perconsole data but full mostly by FF FF FF etc) cISD: same as bkpps31 (includes perconsole data) and part of your serial number that can be checked xx-2745934-xxxxxxx-chech-2xxx (if i have figured it out right) cvtrm 40000 in lenth.88.02% is FF filed. but has different data compaired to bkpps31 eEID: same as bkpps31 (includes encripted per console data) trvk_pkg0 SCE headder present and same as bkpps31 trvk_pkg1 SCE headder present and same as bkpps31 trvk_prg0 SCE headder present and same as bkpps31 trvk_prg1 SCE headder present and same as bkpps31 @monu1232009 can you flash the bkpps31 onto your ps3 twice then empty your sd card and make a new dump re-name that dump "linker" or something. then can you connect your nor clip and dump again (you dont need to de-solder the linker) and rename this one "clip1" then upload them please. i am still thinking a wire is not connected propperly OR there are just difficult segments on the NOR chip that are being a pain to write to / read from (this is why i say to flash the dump to ps3 twice) @playerkp420 thanks for the dump. its the same as the bkpps31 that he uploaded in this thread. but it was good to get a hold of it.

at this time my nor clip is not working properly therefor i attached linker to my mobo...
but i can check linker connection again and again because i have free 6 hours from now. tell me please what should i do now?

and i wrote in this thread that two days ago when i flashed my console with bkpps31.bin after that i turned on my ps3 the green led flashed for 2 sec then there was no light {even no red light}. so i want to ask you that. did i unbrick console at this time or it is because a bad flash?

[baileyscream]

Originally Posted by monu1232009 at this time my nor clip is not working properly therefor i attached linker to my mobo... but i can check linker connection again and again because i have free 6 hours from now. tell me please what should i do now? and i wrote in this thread that two days ago when i flashed my console with bkpps31.bin after that i turned on my ps3 the green led flashed for 2 sec then there was no light {even no red light}. so i want to ask you that. did i unbrick console at this time or it is because a bad flash?

no its a type of brick.
unplug the linker from the E3 and see if it boots (i doubt it will)

if not then connect tristate on the ps3 to sbe on the linker.
then use flashfun so the ps3 will boot and not shut off.

flash the bkpps31 twice to the ps3
then empty the sd card and create a new dump
rename it to test1 and upload it for me.

you can also see if ps3 boots now:
turn off ps3 then switch flashfun off
turn on ps3 and see if it boots.

[monu1232009]

Originally Posted by baileyscream no its a type of brick. unplug the linker from the E3 and see if it boots (i doubt it will) if not then connect tristate on the ps3 to sbe on the linker. then use flashfun so the ps3 will boot and not shut off. flash the bkpps31 twice to the ps3 then empty the sd card and create a new dump rename it to test1 and upload it for me. you can also see if ps3 boots now: turn off ps3 then switch flashfun off turn on ps3 and see if it boots.

sorry yesterday i was not able to be online cause of some problem in my net connection.
i checked it without linker it turned off itself in 3 or 2 sec.

i flashed two time my console and made a back up here is its link

http://www.mediafire.com/?5hlfgu8usx1tdry

...
************* [ - Post Merged - ] *************
may be it can help to seniors to help me.


if my ps3 is flashed 30.bin it shows brick signs{no hdd no video and audio and hard reset}
if it is flashed by 31.bin after turning on at ps3 ps3 mode it turns off itself within 3 sec.

31.bin only have doubled part start at AA8020 till AAB9A0. and this part can be found valid in 30.bin , 3.bin and 32.bin..

and also which part is not identical between 31 and 30 , it can be found identical between 31 and 32 or 31 and 3{the currupted on}.

[baileyscream]

Originally Posted by monu1232009 sorry yesterday i was not able to be online cause of some problem in my net connection. i checked it without linker it turned off itself in 3 or 2 sec. i flashed two time my console and made a back up here is its link http://www.mediafire.com/?5hlfgu8usx1tdry ... ************* [ - Post Merged - ] ************* may be it can help to seniors to help me. if my ps3 is flashed 30.bin it shows brick signs{no hdd no video and audio and hard reset} if it is flashed by 31.bin after turning on at ps3 ps3 mode it turns off itself within 3 sec. 31.bin only have doubled part start at AA8020 till AAB9A0. and this part can be found valid in 30.bin , 3.bin and 32.bin.. and also which part is not identical between 31 and 30 , it can be found identical between 31 and 32 or 31 and 3{the currupted on}.

thank you
that has helped clear things up.
the dump you posted does not compaire with the 31 dump
some parts are allready byte reversed some parts are missing some parts are full of doubbled up sections.

so i would say your wiring is messed up.
if it was wited right then the dump you flashed twice would have come back off as an exact copy.

remove all your wires and re-do them
make sure you remove the old solder and have the test points very clean before you re-solder the wires
also do the linker side aswell (rewire the linker)

then flash the 31 dump twice again and do a freash dump. rename it to test2

upload test2

(i know the 31 dump is not 100% but its your best one and so the best to do these tests with)

once you get the dump comming back off the ps3 and it compaires 100% to how it went on then we can start trying to re-build a working dump.

[monu1232009]

did you compare it to patched bkpps31.bin?


ok may be i have done a mistake. i should flashed twice my ps3 with unpatched bkpps31.bin then back up it and then upload it name as test1.bin.


ok i will it with untouched bkpps31.bin and post its link test02.bin. give me only 30min
************* [ - Post Merged - ] *************

Originally Posted by baileyscream thank you that has helped clear things up. the dump you posted does not compaire with the 31 dump some parts are allready byte reversed some parts are missing some parts are full of doubbled up sections. so i would say your wiring is messed up. if it was wited right then the dump you flashed twice would have come back off as an exact copy. remove all your wires and re-do them make sure you remove the old solder and have the test points very clean before you re-solder the wires also do the linker side aswell (rewire the linker) then flash the 31 dump twice again and do a freash dump. rename it to test2 upload test2 (i know the 31 dump is not 100% but its your best one and so the best to do these tests with) once you get the dump comming back off the ps3 and it compaires 100% to how it went on then we can start trying to re-build a working dump.

link of test02.bin

http://www.mediafire.com/?zntqeehu8yc8bkn

[baileyscream]

Originally Posted by monu1232009 did you compare it to patched bkpps31.bin? ok may be i have done a mistake. i should flashed twice my ps3 with unpatched bkpps31.bin then back up it and then upload it name as test1.bin. ok i will it with untouched bkpps31.bin and post its link test02.bin. give me only 30min ************* [ - Post Merged - ] ************* link of test02.bin

ok they match.

the one you uploaded before how did you patch it?

most of the test1 is byte reversed so i assume you

1. byte reversed the dump then patched it then flashed it to ps3.?

or

2. patched it with rogero and then byte reversed it then flashed it back?
************* [ - Post Merged - ] *************
@monu1232009

can you delete your dumps off the upload sites you have used asap

dont post anymore in here just p/m them to me but carry on replying in this thread

[monu1232009]

ok i will delete them.

i patched it with flowrebuilder with option {patch a byte reversed nor dump or an interleaved and unscrambled nand dump] then select progskeet_patch.txt . i downloaded it from your guide link.
************* [ - Post Merged - ] *************
i have deleted all files from web is that ok?
************* [ - Post Merged - ] *************

Originally Posted by baileyscream ok they match. the one you uploaded before how did you patch it? most of the test1 is byte reversed so i assume you 1. byte reversed the dump then patched it then flashed it to ps3.? or 2. patched it with rogero and then byte reversed it then flashed it back? ************* [ - Post Merged - ] ************* @monu1232009 can you delete your dumps off the upload sites you have used asap dont post anymore in here just p/m them to me but carry on replying in this thread

one more thing may be i should tell you that when i installed rogero 4.21 v01 cfw at this time i was not at kmeaw cfw but i was at [PS3] Rogero CEX-4.21 CFW does it matter ?
************* [ - Post Merged - ] *************

Originally Posted by baileyscream ok they match. the one you uploaded before how did you patch it? most of the test1 is byte reversed so i assume you 1. byte reversed the dump then patched it then flashed it to ps3.? or 2. patched it with rogero and then byte reversed it then flashed it back? ************* [ - Post Merged - ] ************* @monu1232009 can you delete your dumps off the upload sites you have used asap dont post anymore in here just p/m them to me but carry on replying in this thread

sorry i was at rogero ps3 4.21 spoofer cfw

[baileyscream]

Originally Posted by monu1232009 ok i will delete them. i patched it with flowrebuilder with option {patch a byte reversed nor dump or an interleaved and unscrambled nand dump] then select progskeet_patch.txt . i downloaded it from your guide link. did you then byte reverse it again? after the above the dump is the wrong way around. so if you flash this then it wont work ************* [ - Post Merged - ] ************* i have deleted all files from web is that ok? yes ************* [ - Post Merged - ] ************* one more thing may be i should tell you that when i installed rogero 4.21 v01 cfw at this time i was not at kmeaw cfw but i was at [PS3] Rogero CEX-4.21 CFW does it matter ? ************* [ - Post Merged - ] ************* sorry i was at rogero ps3 4.21 spoofer cfw

if you was on 4.21cfw then it should have given a "corrupt data" warning and then not even started to install

if you was on 3.55cfw with 4.21 spoof then really you should have put 3.55ofw on then 4.21cfw
...........................................................................................

ok put the 31.bin on your sd card and the E3_downgrader and do the 1 key downgrade step in my guide but also you need switch 1 (flashfun) up during the 1 key downgrade step
do this twice again (doing it twice will help the nor accept alot of changes as sometimes sections are hard to write to)
then empty your sd card and do a dump (test3) and message me it

[monu1232009]

ok i will try it
************* [ - Post Merged - ] *************

Originally Posted by baileyscream if you was on 4.21cfw then it should have given a "corrupt data" warning and then not even started to install if you was on 3.55cfw with 4.21 spoof then really you should have put 3.55ofw on then 4.21cfw ........................................................................................... ok put the 31.bin on your sd card and the E3_downgrader and do the 1 key downgrade step in my guide but also you need switch 1 (flashfun) up during the 1 key downgrade step do this twice again (doing it twice will help the nor accept alot of changes as sometimes sections are hard to write to) then empty your sd card and do a dump (test3) and message me it

i am flashing at 100001 with bkpp3.bin{.31} + e3_downgrade.bin is that ok?

[baileyscream]

Originally Posted by monu1232009 ok i will try it ************* [ - Post Merged - ] ************* i am flashing at 100001 with bkpp3.bin{.31} + e3_downgrade.bin is that ok?

yes aslong as its the un-patched dump