[domelec]

nand clip u add the 3.3v and gnd from ur skeet or other psu to Y adapter board

nor clip u add the 3.3v to the clip (small via in corner=3.3v point) and gnd u can put to skeet as the 50 pin connector as gnd connected

[digiprog]

Originally Posted by domelec nand clip u add the 3.3v and gnd from ur skeet or other psu to Y adapter board nor clip u add the 3.3v to the clip (small via in corner=3.3v point) and gnd u can put to skeet as the 50 pin connector as gnd connected

yes but the skeet provides only -500ma while we need 1500ma powering the NOR chip so we can DUMP/WRITE the chip..

[Sarah1331]

Originally Posted by digiprog yes but the skeet provides only -500ma while we need 1500ma powering the NOR chip so we can DUMP/WRITE the chip..

No the skeet has available a max of 500ma from the USB the skeet it's self will draw on that and you have the transistor that out puts 3.3 will drop some aswell be careful how much you draw through the transistor as you could overload it e.g. Using dual powered USB cable


Sent from my iPhone 5 using Tapatalk

[domelec]

Originally Posted by digiprog yes but the skeet provides only -500ma while we need 1500ma powering the NOR chip so we can DUMP/WRITE the chip..

u have quoted on my nand part yet mention nor lol

the way i put works well on v1.1 and v1.2
tested many many times

[Sarah1331]

Originally Posted by domelec u have quoted on my nand part yet mention nor lol the way i put works well on v1.1 and v1.2 tested many many times

You didn't need to put gnd to y adaptor as it goes through the 50 pin FCC cable only 3.3 v


Sent from my iPhone 5 using Tapatalk

[digiprog]

Originally Posted by Sarah1331 No the skeet has available a max of 500ma from the USB the skeet it's self will draw on that and you have the transistor that out puts 3.3 will drop some aswell be careful how much you draw through the transistor as you could overload it e.g. Using dual powered USB cable Sent from my iPhone 5 using Tapatalk

yepp this is why i wanted an external adapter to power the nor *not the ps3 psu or atx psu trick..*

[Sarah1331]

Originally Posted by digiprog yepp this is why i wanted an external adapter to power the nor *not the ps3 psu or atx psu trick..*

I see your point but were just trying to keep costs down and get the 1.2 working if you get me with the nor there's nothing wrong with wiring up to the console or using console itself if you can go to trouble to adapt a power source there's already one we can use


Sent from my iPhone 5 using Tapatalk

[domelec]

Originally Posted by Sarah1331 You didn't need to put gnd to y adaptor as it goes through the 50 pin FCC cable only 3.3 v Sent from my iPhone 5 using Tapatalk

true
but u would if u used an external psu :P
either way 3.3v to adapter
and 3.3v to nor clip
they work

[digiprog]

yes ofcourse sarah.. u know educational purpose only :P

[Sarah1331]

Originally Posted by domelec true but u would if u used an external psu :P either way 3.3v to adapter and 3.3v to nor clip they work

No you woudnt if you powered it from the console and not the skeet it's still grounded and powered from the console or ex psu

Same for nor but like I have said eairler nor needs external power ( I know you didn't say you didn't)


Sent from my iPhone 5 using Tapatalk