[creedy2483]

Basically I followed the guide on here to downgrade console was on ofw 4.31 done everything etc with e3 flasher patched dump re flashed it had no problems rebuilt console and it asks for firmware 4.31 and above I tried to install rogero 4.30 v2 cfw etc but keep saying ni update so I downloaded the cfw 4.31 from here to and it found update stright away installed but now whwn powered on I have all lights etc console seems to be running but just no picture or sound at all I reformated the harddrive and then I had picture again and was able to do process again but same again is this bricked or what guys. Should I be installing a different firmware I dont have a service dongle so I used method one in the guide any help spent hours doing it thought I was there then bang any advice be great.
************* [ - Post Merged - ] *************
Also can still get into revovery mode

[digiprog]

@creedy2483 use the three muskeeters patch and then turn ur ps3 on and connect a controller and proceed to update to rogero 2.05.

[creedy2483]

I used the three muskerters patch mate flashed it back etc already then this

[digiprog]

wich 4.31 ur using rogero's one ? cuz this seems to be a firmware problem

[creedy2483]

The one I downloaded from the guys folder in the tutorial link do u have a few links anywhere to different rogereo 4.31 do u think its just firmware problem or is it a brick thouhht it had all gone right untill I hit this wall

[digiprog]

okay now creedy calm down.. give me info about ur console like what model is it ? and @playerkp420 would help out here .. and now just wait till the big bosses sees the thread..

[creedy2483]

Okay its a 320gb slim cech 2503b checked minfirmware was 3.40 and date code 0c if thsi is ant hel could u give me a link to a cfw in 4.31 so I xan try a different firmware

[playerkp420]

Originally Posted by creedy2483 Okay its a 320gb slim cech 2503b checked minfirmware was 3.40 and date code 0c if thsi is ant hel could u give me a link to a cfw in 4.31 so I xan try a different firmware

If you were on OFW 4.31, you can't use Rogero 4.30.

You need to use MiralaTijera 4.31 CFW.

The link is in the guide below. In Chapter 2, Part 1, METHOD 1.

Since you can still enter recovery menu, you should be ok if you install that with option 6.

Good luck.

[creedy2483]

Can I then downgrade to 3.55 with the rogereo downgrade pup

[psxpetey]

how hard is it to downgrade and get it all ready for backups