[Decoy]

Originally Posted by underwurlde Okies! Will add it. Guess it won't be complete without it TBH. Andy

U need a patent now . Great job !

[M8nTrap]

Originally Posted by Sarah1331 If you can solder 0.25 pitch freehand you piss this Sent from my

yes it's impossible! when i see the legs...brrr!
but i'm ok to buy one Daughterboard to andy if he made some Dboards...
is the better alternative! we have no news from mr UFxxxx be evaporated "pschiiiiit!!!"
************* [ - Post Merged - ] *************
if it's possible I want a "saved by underwurlde" logo on mine!

[digiprog]

great job broo .. that's really a good news

PS. this thread should be sticky !
************* [ - Post Merged - ] *************
umm .. @underwurlde would it be possibile to add a 3.3v 1500ma input adapter to the board for the NOR use ? and sorry to ask :P but it made me so happy and im verry thankful for the work u did

[Sarah1331]

Originally Posted by digiprog great job broo .. that's really a good news PS. this thread should be sticky ! ************* [ - Post Merged - ] ************* umm .. @underwurlde would it be possibile to add a 3.3v 1500ma input adapter to the board for the NOR use ? and sorry to ask :P but it made me so happy and im verry thankful for the work u did

Try a dual powered USB cable first you should be able to draw ~900 - 1000mw

Try and look at results


Sent from my iPhone 5 using Tapatalk

[digiprog]

Originally Posted by Sarah1331 Try a dual powered USB cable first you should be able to draw ~900 - 1000mw Try and look at results Sent from my iPhone 5 using Tapatalk

YES !! will test !!

[Sarah1331]

Or splice two dual USB cables that way you will have 5v 2000ma obviousley you will lose some powering the skeet and the step down to 3.3v ect make sure the transistor can handle so much been drawn through it also


Sent from my iPhone 5 using Tapatalk

[MJ999]

@underwurlde What wires did you use to solder the wires to chip ?

any progress on NOR ?

[underwurlde]

Originally Posted by MJ999 @underwurlde What wires did you use to solder the wires to chip ? any progress on NOR ?

Just stripped some out from multi-cored wire. Simple.0.20mm diameter.

No progress on NOR as of yet... awaiting delivery of Sarah1331's kind donation

Andy

[Sarah1331]

Already posted await Royal Mail super quick delivery


Sent from my iPhone 5 using Tapatalk

[underwurlde]

Right-tee-ho!

Just updated Schematic based on various requests: 50 way ZIF socket now added for completeness and as well as being able to plop a NAND flash directly onto the PCB, one also has the option to plop a NOR flash on it too now.

Apologies for the slight delay in updating all of this - with just two layers to play with and limited space (the smaller the PCB, the cheaper) it proved to be a bit of a head-scratch to route everything.

So, updated schematic:
ProgSkeet Phoenix v1.0 Schematic.jpg

Resultant PCB:
ProgSkeet Phoenix v1.0 PCB.jpg

Schematic in pdf format: (as the above jpg may not be of high enough resolution)
ProgSkeet Phoenix v1.0 Schematic.pdf

Nice if someone could cast their eyes over this and spot any errors and report back before I order some PCBs (probably in the new year now).

3D Renderings of the PCB




Andy